bigbassman:need help

[ScrapeNBy]

hey loyd,i got a hold of another 97.3 and was wondering which would be loader,3 12w7's with 120 inches port or 3 10w7's with 180 inches of port?second could you design a box for which would be loader(97.3 on each sub).Thanks Noah

[NDMstang65]

noah i'm thinking 3 12's would be your best bet,(from lspcad program) we can get some more port area out of that box if need be ;)
just let loyd and i get crazy with fiberglass and ducttape :D

[bigbassman]

Originally posted by ScrapeNBy:
hey loyd,i got a hold of another 97.3 and was wondering which would be loader,3 12w7's with 120 inches port or 3 10w7's with 180 inches of port?second could you design a box for which would be loader(97.3 on each sub).Thanks NoahIm feeling the 10" models...

I'll do some work on LSPcad later.. and get back to you... smile.gif

Loyd L.

[Killi]

based on power alone I'm gonna argee with Loyd. the 10's should have more excursion thus more displacement with the power you have over the 12's

Craig

[ 09-16-2002, 07:09 PM: Message edited by: Killi ]

[ScrapeNBy]

im only going to be able to get about 14"high 48.5" wide out of my cut through.i am in search for 155 now since we hit 150 on the x.

[Conclusive]

based on power alone I'm gonna argee with Loyd. the 10's should have more excursion thus more displacement with the power you have over the 12's

Craig[/QUOTE]

It would need a helk of a lot more excursion to match the cone area difference of the twelves.

I say the twelves. smile.gif

[Booming_Creation]

were currently building loyds new wall. hehehehehe

alot of different cuts. LOL

hope it works cause then ill have one too
:D

[NDMstang65]

noah now remember what you told me that one time with the guy that reviewed all of the w7's, and the 12's had the highet output capabilites of all
;)
i'm with chad and say 12's again also!

[lacent]

instead of worrying about the w7's why dont you change to elemental sp's ;0) j/k well noah i agree i would try to fit all three 12's and maybe making your cut thru a little bigger you have some room on the sides dont ya?

[Booming_Creation]

hey might as well get the sp's. we have 7 coming to my house. opps did i say that out loud??? :D

Noah, you need to come up to our domain and go to the MECA wv state finals with all of us!!!!

[ScrapeNBy]

the measurements i gave before is the max i can cut.i'm running 2 12's with 120 square inches now.i'm wondering how a third 12 with no port gain is going to gain more than 3 10's with 60 more inches of port.

[bigbassman]

Originally posted by ScrapeNBy:
the measurements i gave before is the max i can cut.i'm running 2 12's with 120 square inches now.i'm wondering how a third 12 with no port gain is going to gain more than 3 10's with 60 more inches of port.Im riding the fence after playing with LSP...

I'll get back later..

Loyd L.

[Conclusive]

Originally posted by ScrapeNBy:
the measurements i gave before is the max i can cut.i'm running 2 12's with 120 square inches now.i'm wondering how a third 12 with no port gain is going to gain more than 3 10's with 60 more inches of port.More port area does not always mean more SPL.

[bigbassman]

Originally posted by Conclusive:
More port area does not always mean more SPL.you mean this hole in my box isn't loud? :D

wait a second... what's a port?

who are you?

where am I?

Loyd L.