controlling 2 x-fires with one remote level control

[thunder-N-light]

i dont see why i can't, but can i simply split the cable and control both amps with one control rather than trying to match them individually?

------------------
Attention Nashville, we have incoming!
The SHOCKERS have landed!

[Accord]

i talked to techs at Xfire , they were unsure , but they said tat it probally would work , just make sure you have the correct #of wires are correct

------------------
<A HREF=http://www.termpro.com/asp/competitorstats.asp?Competitor_ID=1409 Target="_new"> http://www.termpro.com/images/dbstats.gif <A>

[Hertz_so_good]

I asked Casey about this. He said theoretically it is possible, but that there aren't any splitters available that are wired correctly.
If you find differently, please let me know

------------------
Jeff

[Accord]

if you go you your local shack i am sure you can have some made ,

------------------
<A HREF=http://www.termpro.com/asp/competitorstats.asp?Competitor_ID=1409 Target="_new"> http://www.termpro.com/images/dbstats.gif <A>

[thunder-N-light]

i can make them myself. You could a type of intercom cable, i use it in homes all the time. radio shack would have everything needed.

------------------
Attention Nashville, we have incoming!
The SHOCKERS have landed!

[SweetSoundsAudio]

I've been meaning to try this on the memphis amps (same as x-fire), but haven't had time to yet. If you get to it first....please post your results!

------------------
Jeff
President, Sweet Sounds Inc.
Authorized Dealer for Cerwin Vega, Image Dynamics, Clarion Pro Audio, Stinger, Hifonics, Digital Designs, Memphis and more.....
http://krypton.mankato.msus.edu/~kab/pict/tss.jpg

[Roadshop Tech]

we are in the process of building a splitter box for 16 Mtx Thunder 1000D's ...We will let ya know very soon

------------------

[slim823]

Im going to have to do the same with my 2 Power 800a2's. Just use one of those splitter things for the phone( if you have a phone that was 2 lines). It's almost like a y-adapter or something.

------------------
http://publish.hometown.aol.com/slim823/myhomepage/animrf.jpg.jpg

www.sounddomain.com/2592 (http://www.sounddomain.com/2592)

[Dukk]

I don't know how well that is gonna work since the knob actually adjusts a preamp resistance in a circuit. the knob is in the middle of a circuit, it recieves signal as well as sending it. The knob may 'confuse' the amps.

Think of it this way; You have a tank of red water and a tank of blue water. these lead to a common tap like garden hose bib that has a hose splitter on the other end with 2 hoses going to 2 empty tanks. If you turn the tap on you can vary the amount of water through it, but can you ensure that you will get red water back out of one hose and blue out of the other, or will you get purple out of both? I'm guessing purple...

------------------


And that's the bottom line, cuz:
LORD DUKK SAYS SO!

The Dukk says: Know your bass: PORT your damn box!!

D R A G U L A
Let us prey.....

[slim823]

I wouldn't mind having 2 knobs

------------------
http://publish.hometown.aol.com/slim823/myhomepage/animrf.jpg.jpg

www.sounddomain.com/2592 (http://www.sounddomain.com/2592)

[thunder-N-light]

i dont exactly follow ya there dukk... http://www.termpro.com/ubb/smile.gif
but the crossfire doesn't use a knob, it uses a digital thingy.....but as my other post states, on crossfires it does work, but with a little caveat...read the post for more...

------------------
Attention Nashville, we have incoming!
The SHOCKERS have landed!

[This message has been edited by thunder-N-light (edited 03-18-2000).]