1level control on 2 x-fires works, but....

[thunder-N-light]

i did it tonite, i cut the cords and spliced in the end of the other cord. yes, it works. But even with the car not running (so not alt noise) there is a very very faint whine in the subs. unplug the control, and it goes away. I'm not sure why this would be...not even sure how this can induce noise....but it does. i am going to try insulating the wires from each other more and see what happens.

------------------
Attention Nashville, we have incoming!
The SHOCKERS have landed!

[VegaS10]

I am not familiar with these amps at all....but, If the knob thingy controls input...maybe that cable you cut was sheilded? Could be a possibility. If it was just make the sheild connections on the "split" ends...let us know what happens

------------------
U.S.Amps dealer
www.nsplcompetition.com

[RWAudio]

no idea if this would work.. but the phoenix gold site tells you how to use one lpl for multiple amps... they might be similar.. you never know.. download this.. http://www.phoenixgold.com/pdfs/LPL.pdf
hope that helps

------------------
9 12's in the hatch of a golf