posted
Hi, I'm fairly new to this forum but here is my problem: I just bought this new panasonic deck from etronics.com a while ago and it's been working "ok". Right from the start after I finished installing it, I noticed that it skipped alot more often than my old JVC deck. I used my same music cds and I drive under the same conditions, yet sometimes I can't listen to a song without it skipping at least every 5 seconds! Is there anyone here that has the same problem or knows how to fix this? Here is what I have:
-Panasonic CQ-C8300U mp3 player -it's in a 2000 toyota corolla ve -i have a professional wiring harness -2 6x9's powered by a crappy 400watt pyramid amp -a 12" sony xplod sub powered by a 700watt alpine amp
-i should also note that it doesn't skip when i don't drive
I have one suspicion that i got from a topic that i found on this forum... could it be because of the sub and the bass? it didn't affect my jvc deck at all but maybe this deck isn't build for this. thanks for reading,
posted
My guess: The H/U is loose in it's mounting position, or the mounting kit is flimsy OR there may be some pressure being applied to the back of the unit where all the wiring is.(Which is transferring road vibration)
It's definately a mechanical problem.(It skips mostly when the car is being driven= vibration caused skipping)
It could be possible that the H/U is bad. (faulty suspension or loose cd transport carriage)
Good luck!
-------------------- Yes this is my sig, no there is nothing for you to see. Quit looking at me, nothing is going to happen. Stop staring at me, cut it out, leave me alone.... Posts: 3096 | From: AZ | Registered: May 2003
| IP: Logged |
posted
Oh! Gotta give ya credit for listing everything that you have. Shows that you've taken some time and researched around here.
Thanks!
-------------------- Yes this is my sig, no there is nothing for you to see. Quit looking at me, nothing is going to happen. Stop staring at me, cut it out, leave me alone.... Posts: 3096 | From: AZ | Registered: May 2003
| IP: Logged |
posted
I would agree its probly time for a new cd player if the mounting is all legit
-------------------- WWW.DCSOUNDLAB.COM Team Hifonics Voted 2004 DB Drag Rookie of the year 2004 World Finals 3rd place finish SS1-2NW 2005 World Finals 4th place finish SS1-2NW 2006 World Finals 3rd place finish SS3-4 2006 Super Street DeathMatch Participant 2007 Super Street 3-4 163.1 with 2 amps 2007 West Coast SS3-4 Champion Posts: 3002 | From: West Coast | Registered: Nov 2003
| IP: Logged |
posted
Thanks for the replies everyone! First of, the HU is secured pretty tightly, so that can't be it. I also don't think that the HU is "bad" cause it's brand new. What i haven't thought about is pressure from behind where all the wires are. I know that back there in the console everything is really tight because of the heating ducts.
So i'm gonna see what i can do to rearrange some of the wires and hope for the best! Thanks again,
posted
I along with a couple of other people are having the same problem with our 8400's so it may be a manufacturer issue.
-------------------- Team Funkin Audio Team Kinetik Power Team Tsunami "Obssesed is a word the lazy use to describe the dedicated." http://www.cardomain.com/memberpage/629701 Posts: 972 | From: Cleveland, TN | Registered: Nov 2004
| IP: Logged |
posted
Heath, if that is the case and you ever find out, could you let me know? I'm really close to getting a new deck cause this is driving me nuts.
Posts: 4 | From: Canada | Registered: Jan 2005
| IP: Logged |
posted
I'm swapping mine out tomarrow, but you better hurry because the new gear is coming out soon.
-------------------- Team Funkin Audio Team Kinetik Power Team Tsunami "Obssesed is a word the lazy use to describe the dedicated." http://www.cardomain.com/memberpage/629701 Posts: 972 | From: Cleveland, TN | Registered: Nov 2004
| IP: Logged |
posted
I've consistantly burped mine at 149-150 on the TL while holding it in my hand inside the cab but still I am having these issues.
-------------------- Team Funkin Audio Team Kinetik Power Team Tsunami "Obssesed is a word the lazy use to describe the dedicated." http://www.cardomain.com/memberpage/629701 Posts: 972 | From: Cleveland, TN | Registered: Nov 2004
| IP: Logged |
posted
I've had the 8400U and it skipped every 2 seconds, if i farted at a stop light the CD would stop playing (not literally). After a while I started noticing little scratches on my CD's (circular scratches meaning the transport case was loose allowing the CD to hit something inside) I took the unit back and down graded to my current 8100U since then.......not a single problem.
Dump the unit and look for something better, maybe even down grade to the 8100U? just a thought.
-------------------- Mike Zadler
2003 Usaci 151.2@48hz (AudioControl 170) 2003 AS3: 149.6@39hz (Linx Meter) 2004 S4: 145.2@41hz (TermLab) 2005 M1: 149.3@69hz Retired indefinately. Still into car audio to help others where I can. Posts: 3029 | From: I don't just want to knock over the pins, I WANT TO VIOLATE EM!!!! | Registered: Jun 2000
| IP: Logged |
posted
take it back and get you a pioneer hu mine has never giving me any trouble and it is rare that you will hear bad things about a pioneer hu.....(my 2 cents)
-------------------- "of all the things i have lost i miss my mind the most" by ozzy osbourne "it doesnt really matter wher you are from as long as we are all the same religion" by peter griffin-family guy dont have a vehicle so all my stuff is waiting to be installed pioneer deh-p3600 mosfet hu 4-12" kicker comps 1-kx600.1 1-1 fared stinger cap 4awg all the way
quote:Originally posted by demonman66669: take it back and get you a pioneer hu mine has never giving me any trouble and it is rare that you will hear bad things about a pioneer hu.....(my 2 cents)
That depends on the year of the pioneer. If you have one with the rubber touch buttons, the rubber wears out fast and makes it look nasty. Other then that, its not too often that you hear of a problem from Pioneer units. I like the new 05 units from pioneer, might even consider getting one, if i find the right price for 1.
-------------------- Mike Zadler
2003 Usaci 151.2@48hz (AudioControl 170) 2003 AS3: 149.6@39hz (Linx Meter) 2004 S4: 145.2@41hz (TermLab) 2005 M1: 149.3@69hz Retired indefinately. Still into car audio to help others where I can. Posts: 3029 | From: I don't just want to knock over the pins, I WANT TO VIOLATE EM!!!! | Registered: Jun 2000
| IP: Logged |
posted
i really dont care what it looks like i mean have you seen my truck but no mine doesnt have the rubber touch buttons and i dont use the buttons on the hu except the one to lower the face plate and the one to eject the cd except for those two things the remote does everything
-------------------- "of all the things i have lost i miss my mind the most" by ozzy osbourne "it doesnt really matter wher you are from as long as we are all the same religion" by peter griffin-family guy dont have a vehicle so all my stuff is waiting to be installed pioneer deh-p3600 mosfet hu 4-12" kicker comps 1-kx600.1 1-1 fared stinger cap 4awg all the way
posted
Thanks everyone, as soon as i get the money i'm trashing the 8300 (not literaly) and getting a Pioneer DEH-P7600MP
the 8300 would literally skip sometimes without me even driving. I've looked around on other boards, and that model seems to have that trouble alot.
Posts: 4 | From: Canada | Registered: Jan 2005
| IP: Logged |
posted
I was thinking of getting a Panasonic soon. Is that the only one people are having alot of problems with? I had one a long time ago (2001) and it was one of the better(for not skipping) that I had. I really liked my Eclipse 5303 though.
-------------------- 1 BAMF 5500/1D 2 DB Drive PLW15D4's 1BAMF 1600 4 CH. Tweets and MTX dash speakers up front and factory 5x7's in sides Posts: 2619 | From: Keystone South Dakota | Registered: Feb 2001
| IP: Logged |
posted
From what I've seen, panasonic usually make a strong H/U. It may be only that model. Or a bad batch?
-------------------- Yes this is my sig, no there is nothing for you to see. Quit looking at me, nothing is going to happen. Stop staring at me, cut it out, leave me alone.... Posts: 3096 | From: AZ | Registered: May 2003
| IP: Logged |
quote:Originally posted by mikeea: Thanks everyone, as soon as i get the money i'm trashing the 8300 (not literaly) and getting a Pioneer DEH-P7600MP
the 8300 would literally skip sometimes without me even driving. I've looked around on other boards, and that model seems to have that trouble alot.
let me tell you, you will absolutely LOVE the 7600 (ive got one). never skips, even when my old HU did, awesome features and a nice looking HU. anyways, youll be very happy with the 7600.
-------------------- the new setup...as of 11/11/05:
Kenwood KDC-MP828 Infinity 63.5i & Kappa Perfect 6.5" comp set JBL GTO 75.4II ^all in a 2002 saturn sc2^
Click below...
Announcer: Pawtucket Patriot Beer. If you buy it, hot women will have sex in your backyard. Lois: Ugh, typical male fantasy...women drinking beer. I guarantee you a man made that commercial. Peter: Of course a man made it. It's a commercial Lois, not a delicious Thanksgiving dinner. Posts: 1172 | From: East Texas | Registered: Feb 2004
| IP: Logged |