posted
Is it ok to wire a smaller alpine (50x2) amp off my bd1500.1 off the terminals from the bd. I take the pos., ground, turn on, and rca's and run them from the bd terminals to my alpine. I get a very loud hiss noise when the rmps of my car get higher as im going down the road? Tell me what to do, wire differently?
Posts: 247 | From: Iowa | Registered: Nov 2001
| IP: Logged |
posted
is this question for real? I dont think it all that good of an idea. if it is. I would start at your ground.make suer you have a good ground If I were you I would use a (distro) block for the pos&neg so you can use a big ground cable. check your rca's make sure they are away from all power wires get your amp checked out to see if something inside is the problem.
posted
they used to do this with the old punch 40x2 so I would check the arc. and see if you can find some info on it
-------------------- spydermann
Don't get caught in the WEB Gimmie some bass baby keep your XXX and others, MTX for me Is that me in the top 10 now?? Do you smell what the BASS is cooking... Posts: 6799 | From: cincinnati, oh, USA | Registered: Jun 1999
| IP: Logged |
Printer-friendly view of this topic