posted
Mr. Flamboyant, what do you think of 3 L7 10's in 6 Cu. Ft. tuned around 32-34Hz?? How much port would you reccomend as a minimum?? If you need the T/S parameters let me know. I have all of them from kicker for all '02 and '01 drivers. I could even just e-mail you th winISD .drv files.
posted
I am jsut curious, ahs anyone on here used an Eclipse 88150 in an ABC box? If so, which page is it on? I have one in an extended cab truck, and am thinking about switching from the sealed box to an ABC...Thanks!
-------------------- Team Image Dynamics/Zapco/Werewolf/JK Lab Team Kinetik Sick Bastard Audio SQ Who feels it knows it Posts: 7866 | From: Charlotte,NC USA | Registered: May 1999
| IP: Logged |
posted
Took three days, but I read the whole post. Informative, but... There seem to be inconsistencies regarding the correct method of calculating the total volume (A+B). Some posts suggest plotting a large dual-port enclosure, and then adding 1/3 for the 'small' chamber. Others indicate dividing the calculated airspace into 2/3 1/3. I understand the porting and the necessity of subtracting the port / sub volume - I'm just not sure how to derive the TOTAL enclosure volume. Thanks.
Posts: 85 | Registered: May 2001
| IP: Logged |
quote:Originally posted by spl_nut: Others indicate dividing the calculated airspace into 2/3 1/3. I understand the porting and the necessity of subtracting the port / sub volume - I'm just not sure how to derive the TOTAL enclosure volume. Thanks.
calculate 1 BIG box with 2 ports, tuned lower 30Hz (acutally use 3 ports).... chop that box into 1/3 & 2/3 chambers.... make sure there is not too much of the middle port in either chamber, this is where it can get kinda tricky, unless your a math-whiz....
hope this helps,
-L8
[ 01-19-2002: Message edited by: MrFlamboyant ]
-------------------- - Wes Sowers - Discount Car Stereo L.L.C. Kent, Wa 98032 (206)824-5875
posted
hello i m laurent from belgium i cant open thehttp://www.termpro.com/ubb/Forum8/HTML/000124.html and also http://www.termpro.com/ubb/Forum8/HTML/000222.html someone can help e how must i do to open it,it s writting security when i try to open it,i have 3rockford punhc hx2 2*2ohm and 3 rockford bd1000 and i ll like to make a enclosure to make a high score spl(her we make enclosure with simply airport(tubes) and not as the usa with big rectangles) with this install can i make many many db? thanks to help me i m a beginner in the spl competition
--------------------
TEAM A.A.P => The team who comes from an other world Posts: 222 | From: belgium | Registered: Jan 2002
| IP: Logged |
posted
wow this post is at 21 pages and 511 post wow
-------------------- spydermann
Don't get caught in the WEB Gimmie some bass baby keep your XXX and others, MTX for me Is that me in the top 10 now?? Do you smell what the BASS is cooking... Posts: 6799 | From: cincinnati, oh, USA | Registered: Jun 1999
| IP: Logged |
posted
Laurent, Tryin2bump uses the same subs you are in the same type box.
Him, Mr. Flmaboyant and I went through a couple of designs. I'll dig up the posts so you can read em.
You can e-mail Tryin2bump here: nawtynitro2000@cs.com
If you want ot build every box separately and slap them together, use his design. Or else you need to make one big box and calculate a new port length.
Posts: 768 | From: Ottawa, On, Canada | Registered: May 2000
| IP: Logged |
posted
wow i read the whole thing, and now i'm going to build one for sure!!! i was going to make an attempt at a horn box, but i'm gonna try ABC first.
the sub is in the sig.... i think i'll be the first 12" hcca to do this...oh so proud
*i'll probably get started in a few weeks. i'm building it in woods shop so i'll have all the tools i need
