posted
ok so i'm looking to try my hand at at 4th order... in all i want to make one for 4 12s but i want it all to stay in the trunk, i have about 10 cubes total to work with, the external dimensions are 36W X 17H X 30D can go alittle dee[er but it'll be very tight to fit an amp in there somewhere. how big should i make the sealed chamber and the ported chamber? i want to make it to bassrace 39.9 maybe 49.9 if i can get it that loud.
Posts: 323 | From: Brantford, Ontario | Registered: Oct 2007
| IP: Logged |
posted
sealed, maybe .85-1.1cf per sub. ported as big as you can fit
Posts: 5529 | From: Columbus, OH - formerly FL | Registered: Oct 2003
| IP: Logged |
posted
so like 4 cubes for the sealed chamber then it'd only be like 5-6 for the ported one depending on the thickness of the walls
Posts: 323 | From: Brantford, Ontario | Registered: Oct 2007
| IP: Logged |
posted
i'm also goin to try a 4th order for a single 15 just a cheap sub to learn with, i was thinkin 1.5-2 cubes sealed and i was suggested 4-5 for the ported, what do u think?
Posts: 323 | From: Brantford, Ontario | Registered: Oct 2007
| IP: Logged |
posted
single 15"bandpass, sounds about right. as for the four 12"s, your probably better going ported with that kind of airspace...unless your subs EBP is around 30 or less
Posts: 5529 | From: Columbus, OH - formerly FL | Registered: Oct 2003
| IP: Logged |
posted
the 15s ebp is 56 or 58 i can't remember atm, would that still be ok?
Posts: 323 | From: Brantford, Ontario | Registered: Oct 2007
| IP: Logged |
posted
alrite cool, thanx alot, i'm gonna try to build it up tonite and try to find an amp to test it out
Posts: 323 | From: Brantford, Ontario | Registered: Oct 2007
| IP: Logged |
Printer-friendly view of this topic