posted
My clarion is several years old and has been submerged so its no wonder that I get that error 6 sometimes too. The manual says that error 6 means that the CD is loaded upside down.
------------------ Omnidirectional frequencies are a lot cooler than taxes!!
Email me if you know why I'm all about HyperNINE.
Posts: 24 | From: more importantly, where am I going? | Registered: Feb 2001
| IP: Logged |
posted
Is the Cd a store bought Cd or a recorded Cd? My 7575 does that to me with some of the recordable cd's that my friends burn etc.. depending on the brand... ie.. it won't read most memorex's. Just a thought so that may be the problem.. or you could be scratched or have dirt in the head unit.. etc.
------------------ Team Generation Elite Team Natural Disasters oh the memories Expect the Unexpected...
Posts: 397 | From: I move too much... i dont even know where i live anymore :) | Registered: Aug 2000
| IP: Logged |
posted
I have the Clarion 8675z and changer. I get an error 6 when I put a disk backwards in the changer. Have never put one in the head unit upside down, so I am not positive, but I will have my wife drive the truck and she will find out.
------------------ '00 F150 Red Quad Cab 2 JL Audio 10W3 RF BD1000a1 RF Punch 200a4 Clarion drx8675z Head Unit Clarion DPH910 Processor
Posts: 112 | From: Carrollton, TX USA | Registered: Mar 2001
| IP: Logged |
posted
On my 7375 and the 9575 "error 6" means the lazer cannot read the control track... it wont always happen. Sometimes it is a slight misalignment in the mechanism... it should clear if you eject the cd and reinsert it (unless the cd is really scratched).
posted
well i finally pulled the head unit out today and i noticed a big burn spot on the bottom of the deck. well im not the smartest fish in the sea but i think that is definatly related to the problem.........
posted
Try reseting it. It helped my DXZ715. It was giving me alot of error 6's and end even a few error 3's. I think all it means is it can't read it. How the hell would it really know if it was upside down? That was probably just from the trouble shooting chart.
------------------
Clarion Pro audio DRZ715 JL 6.5 components crossfire 602 for components 2 12inch Audiomobile MASS subs 5 CU FT ported tuned to 46.27 HZ 2 Cadence A7HC's 2 optima red tops 160 amp Ohio Gen. Alt. 1/0 all the way around.
quote:Originally posted by pro audio 7575: well i finally pulled the head unit out today and i noticed a big burn spot on the bottom of the deck. well im not the smartest fish in the sea but i think that is definatly related to the problem.........
Aaron, was that the deck that I saw when i was over there last week? You know you shouldn't set fire to your stuff...j/k Any idea on what happened to it? Steve
------------------ Check out Db Don's new site! My stats...not any yet TEAM BEYOND AUDIO
Printer-friendly view of this topic