The baffle of my box runs the width of my roof( 34" ), then slants down the b-pillars ( 22" ), then straight down( 17.25"), the bottom length is 54.25".

Here's were it gets interesting. hehe

From the bottom, it goes back to the wheel well, slants up the angle of the w.w., goes near the rear window, then slants back towards the roof at about the angle of the rear window.

Is there any advantages or disadvantages to having a box of this design?

It's also a vented enclosure. Thanks for any information!!! =)

Well....I know you're an installer so I'm going to stick with the design.

9 seperate pieces to cut, and angles!! AAARRRGGGHHH!!
Thanks dude!!! =)

Disadvantage: hard to build. I suggest you to use a lot of fiberglass to reinforce and seal box. I guess you will build it inside of the car = even harder to build.

Not sure: how will shape of box influence SPL. It might not add anything extra dBs because of volume of the box

quote:

---

Originally posted by Dr.Loudness:
...I guess you will build it inside of the car = even harder to build.

---

Thats what I'm about half done with doing, and holy crap is it HARD and I don't even have any crazy angles! Thank god for LOTS of fiberglass, my one saving grace...hehehe

------------------
Check out Db Don's new site! It rocks! Car Audio and Information Forum

My web pages off of SD: http://members.sounddomain.com/bumpin_yota

Currently runnin':
Eclipse 5504
Eclipse 5083
MTX2300x -->HCCA 6s
RF100a2 -->??rear fill??
MTX2300x -->8815.6 (x2 now!)
Soon:
2 8815s
1 Big Azz ported box - Now under construction!