posted
Right after I put a pair of 12w6's & an 800a2 in a sealed encolsure in the back of my 2k Bonneville SSEi my compass stopped working properly. The compass electronics are back there (along with a ton of other stuff). I am wondering if anyone has ever run into a similar problem and if they were able to fix it. Thanks!
------------------
Posts: 40 | From: New Hampshire | Registered: Nov 2000
| IP: Logged |
posted
That was my theory, however, I want to verify it... And is there any way to find a work around... Perhaps get a magnet field detector and arrange the pair of drivers and a fashion the either negate each other or are far enough away from the compas equipment to be negligable... Thoughts?
------------------
Posts: 40 | From: New Hampshire | Registered: Nov 2000
| IP: Logged |
posted
Good thoughts, but its probably not going to work. Your voice coils also create magnetic fields that are most likely stronger than the fields of your permanent magnets.
------------------
Have meter, Will travel!!
Extreme 1985 Ford Thunderbird 2 DD 9515b's 2 USAmps VLX 400s But soon to change..... SEE IT HERE
Printer-friendly view of this topic