posted
I thought I'd ask before i do my own testing--
I have a 2,500w amp rated at 1 ohm. I've tested this amp doing 667w clean at 4.2ohm
I have another amp, 2 channel. When bridged at a 4ohm load, it says it can do 600w. If this amp can do 600w at 4ohms would it..in the real world..output the same level of power as my 2,500w amp? The trick here is this- the rest load is 0.7 ohms, but the rise at this one specific frequency is 4.2 ohms recieving 667w of power.
Now, this amp(the 2 channel) will prob go into protect wired at 0.7 but while in protection, if i turn the stereo up high enough playing the same frequency, will the amp go out of protection due to ohm rise?
posted
So if the imp rise doesn't start til you are into the burp does that mean that no matter if you burp for one sec or one min your score will only go down right?? So if i have my subs wired to a 2 ohm load when no power is goin to them and play my system for a while the subs will be seeing less power??
-------------------- One 220 amp alt, soon to be a 240 adj regulated One 15" sub 2000 watts 2 batteries an unfinished wall and a 150
06 Meca finalist M1 Posts: 521 | From: IN | Registered: Nov 2004
| IP: Logged |
Printer-friendly view of this topic