posted
box was tuned at 40hz but loudest db is @ 52hz 144.9 on tl didnt have time to use my other port board it changes it to 51hz so i hope to see a gain. i have done nothing to box no resin no braces .how much does resin and all thread usually gain ? also need to round my port board . anybody want to share some tips for gaining db in a blazer? im not trying to set a record just want a little louder .2 memphis mojo 12''s 8 cubes 160sq inch port 2-hifonics bxi1610d's set @45 volts each for now.oh @40hz it lost less than a db so sounds good for daily .box is not bolted down either yet will i see a gain? and will maxx-link gain me when installed?
-------------------- now with (TEAM LOW BUDGET)148.1db @43hz and gaining slow lol. street B setup 2000 4 door s-10 blazer 2-mojo 12's powered by 2-bxi1610d's burp box not built yet. add me to myspace if you want atv_man2007 Posts: 78 | From: paintsville ky | Registered: Jul 2008
| IP: Logged |
posted
I am not by any means, bashing the Maxx-Link but It only gained me about 1 tenth on the meter. It was not reason enough to keep it in line with my current set-up. On the other hand I have heard stories of people gaining 3 or more tenths after installing and tweaking it. I would imagine that you would like to gain actual db's, so I would lean more towards box design.
posted
147.9db @44hz more work to do. fatmat and big 3 not done yet.
-------------------- now with (TEAM LOW BUDGET)148.1db @43hz and gaining slow lol. street B setup 2000 4 door s-10 blazer 2-mojo 12's powered by 2-bxi1610d's burp box not built yet. add me to myspace if you want atv_man2007 Posts: 78 | From: paintsville ky | Registered: Jul 2008
| IP: Logged |
Printer-friendly view of this topic