posted
Ok so here is wat i wanna do i wanna get two orion hcca 12.4's powered by possibly a orion d5000 or an autotek d4000 here is a picture of my trunk of my 2001 durango I still wanna be able to use my third row seats so what options do i have???? would it matter if i used fiberglass box since these woofers are 2000 watts RMS? Can someone like give me some ideas i would appreciate it
Posts: 7 | From: Grand Rapids | Registered: May 2008
| IP: Logged |
posted
Being that your from Grand rapids where my company is based, I'll help ya
According to Orion recommendations are: Sealed 0.9 - 1.35 Ported 2cubic ft / tuned @ 35hz So if depending on your music preference's You should be able to fit 2 of those in that area with the amp in a seperate rack(not screwed to the box) and keep your third row seating.
I personally would build an enclosure with the sub's facing up ported 2 cubes each sub tuned to 35hz with the vent's facing back. The amp rack in between the box and third row seating.
posted
so what do u have a shop or something in grand rapids? would it be any difference if I used a fiberglass enclosure?
Posts: 7 | From: Grand Rapids | Registered: May 2008
| IP: Logged |
posted
No just my company NETech is based in GR. We have locations all over, we are a Cisco Gold partner and work with networking equipemnt.
It's not that fiberglass would make any difference as far as sound it may however give you more room. I would caution using it for an enclosure using those subs unless you really have alot of it and are experienced in it. It would take alot of layers to be done right is all I'm saying. You can easly get the airspace needed and have an amp rack seperate from the box and have it sound great. Throw some measurements up on here and I'll design a box and rack for you.
-------------------- 4-15"btl 4-2608D [IMG insert cool picture here /IMG]
A.K.A Cr@sh/ex_03 on other forums Posts: 131 | From: Michigan | Registered: Jul 2008
| IP: Logged |
posted
here are the measurements they are in inches thanx for helping me out by the way crap i forgot length 2 its 12 inches
Posts: 7 | From: Grand Rapids | Registered: May 2008
| IP: Logged |
posted
Here's a quick concept, keep in mind that it's just a concept but the specs are exact according to Orion. 2 Cubes per sub tuned to 35hz using the 16 Square inch of port per cubic ft of enclosure method.
-------------------- 4-15"btl 4-2608D [IMG insert cool picture here /IMG]
A.K.A Cr@sh/ex_03 on other forums Posts: 131 | From: Michigan | Registered: Jul 2008
| IP: Logged |
posted
oh man thanx for the help i was gonna ask u a question do u know a good place or person that could build this for me? like the only place that i know is extreme car audio but its like a lil too expensive there for me
Posts: 7 | From: Grand Rapids | Registered: May 2008
| IP: Logged |
posted
You are going to need more than one D5000 to run a pair of those subs. They are very inefficiant and power hungry. I would use one D5000 per sub or go with something with more power, like a MMATS 3500.1 or something similar.
-------------------- Mike Schwitz Stay Tuned Audio 262-542-8863 Team MMATS Team Ultra Subs Team SRS Also an "Insider" 262-707-7570 (cell) Posts: 97 | From: Milwaukee, WI | Registered: Jul 2006
| IP: Logged |
posted
I had a 00 Durango that I was able to get 2xSPLX122's behind the third row. If you are still needing help I can send you specs or even the old box I took out.
-------------------- 2xSPLX 122 TRX4.420 TRX2000D 4xSST65 4xTWS.3 KDC-X492 SCell-400 Team Hard Kore Audio Posts: 9 | From: KS | Registered: Sep 2008
| IP: Logged |
![[Wink]](wink.gif)
Printer-friendly view of this topic