posted
ive been out of the game for a while and im needing something different. ive been researching for a few days now but just too many options...i currently have a f250 4 door with 4 kicker c-10s behind the seat in a sealed enclosure...using a punch 200 DSM..ive had in the past (10 years ago)6 12s once and 4 15s a different time in sealed enclosures with the bed cut using this same amp..im not opposed to cutting my bed now..is it still feasible to use this amp on my new setup? im thinking 2 15s or 4 12s. any and all opinions are welcome. i prefer the the low moveing my front windshield base. thanks Jason
Posts: 1 | From: Tyler Texas | Registered: Oct 2007
| IP: Logged |
posted
Well, for your amp question I would defently upgrade your amp. It's an old amp and todays subs run at lower impendence loads and you may short your amp. I would stay with Rockford. They have some really nice and powerful amps out right now. The nice thing about their amps is that you dont have to run high voltage loads to get max power. Check them out. I am getting two of the BD 4000's that put out nearly 5,000 each and thats at a 14.4 voltage load. Now for the system design it all depends on what you are trting to do. Are you just wanting a street beater or do you want to compete? What subs are you wanting to go with? You deffently have alot of options to your system design. I would do 4 12s in a vented box, with about 2k watts to each.
Printer-friendly view of this topic