posted
When it comes time to build my new box I would like to know what is the best way to seal the edges, but leave it removeable? By that I mean I want the edges air-tight (unless its not too terribly important in a ported box, but i doubt that), while leaving the side with the sub removable for access to inside wiring or something of the sort.
Same pretty much goes for a Bandpass design, how do i keep one side removeable for access to the sub while still keeping it airtight?
-------------------- 15" Fi SSD *copper coil* Hifonics BXI1206D @ 1ohm 3.75ft^3 box (thanks AZ_SS) with 33 OR 46 hz tune Optima 34 Red Top Big 3
142.5 Db's Outlaw 3rd place first ever competition. Player started skippin 5 seconds in... who knows if its louder. Well see next time :/ Posts: 481 | From: Az | Registered: Oct 2006
| IP: Logged |
posted
usually i would only want something like the port to be removeable. wiring and all that can be done before the subs go in or even outside the box. I have never tryed ut but I am guessing something like foam weather stripping would work well.
-------------------- SoundWerx Car Audio SoundXtreme Sundown Audio DC Sound Labs T3 Audio PowerMaster Posts: 6554 | From: Buffalo, NY | Registered: Feb 2001
| IP: Logged |
Printer-friendly view of this topic