-An Mtx thunder 282 45x2 rms Stereo output at 4 ohms -A Concept cc-452 150 rms Bridged output at 4 ohms
I recently got a Clarion Apx640.2 (160x2 rms) which I will be running bridged at 4 ohms to get me 640 Rms. Now I have a few questions about adding a 3rd amp.
1./ The total wattage in my system will be around 880 rms.. I don't want to get into a capacitor debate so simple yes or no.. would you recommend one?
2./ Will this be too much of a draw on my stock 92 civic alternator? I have a new battery so no problems there..
3./When I wire the new amp I will now have 3 runs of power wire going directly from the battery to the amps (all fused of course). However I don't care to use a distribution block.. and since the wiring for the new amp will all be 4 awg so it will be drawing the majority of the power I should be ok doing this right?
4./ And lastly I have the remote wire from my deck to the concept amp, and I have the mtx remote piggybacking off the concept's one.. can I safely just piggyback the remote from the new amp to the mtx? or would a relay be reccommended?
sorry for the length..
-------------------- hi Posts: 4 | From: Panama Canal | Registered: Mar 2006
| IP: Logged |
posted
this is your second post. i moved the first one to the appropriate section. check your email. read the rules. closed.
Posts: 8930 | From: over yonder | Registered: May 2001
| IP: Logged |
Topic Closed
Printer-friendly view of this topic