posted
Im looking for a 150 Im currently getting a 148.5 using 3300 watts real power. the box has 2 6" aero ports the box is 4 cu ft after sub displacement. I know everyone says to go smaller. If I do that would yall keep both aero ports or doing something less. Just let me know what yall think. Its a pioneer spl sub (ts-w8102spl) 15".
Posts: 49 | From: jackson tn | Registered: Jun 2009
| IP: Logged |
posted
you could try testing your port length, and firing the box different directions if you havent already done so. but for that vehicle and woofer it seems like a pretty good score
-------------------- Team 2x4 + Soundigital = loud
posted
host the pics on a site, I use myspace or photobucket or tiny pic, then when you get on here, click the button that says image and put the address of the pic in
have you tried sound deadener, or adjesting things in the truck
-------------------- another 152.9+ HHR
SoundStream/XS Power 5th place SS N/W World Finals 08 Reigonal 5th place SS N/W World Finals 09 N. America Posts: 1133 | From: Yorktown, IN | Registered: Aug 2007
| IP: Logged |
posted
I have not tried adjusting anything except the seats. I do not have sound deadner but I will add it to the roof soon. I had a freind sit on the roof and I gained a tenth so i think sound deadner might help a bit.
Posts: 49 | From: jackson tn | Registered: Jun 2009
| IP: Logged |
posted
I will in the next couple of weeks build a ney box> I plan on using the aero ports still But I will go from 4.2 cuft to about 3.6. The sub takes up .28 and If I get close I want a little room to add resin to the corners so after all that I hope to have it around 3.2 or 3.3 cuft. Also I plan to put a large round over on the outside corner of the box that goes from the front of the box to the side that has the ports, I just think that may help air flow. Tell me what you think and any Ideas are welcome. Thanks everyone
Posts: 49 | From: jackson tn | Registered: Jun 2009
| IP: Logged |
retired extreme 1-2 competitor new toy: 91 ranger on bags. ss 3-4 here i come....on hold Posts: 683 | From: trevorton, pa | Registered: May 2002
| IP: Logged |
posted
use a good quality damping material, like Damplifier Pro. don't bother with massloaders like Fatmat. Adding the damping will probably lower the frequency your car desires....so I would do that before rebuilding the box
Posts: 5494 | From: Columbus, OH - formerly FL | Registered: Oct 2003
| IP: Logged |
posted
clean up them ports some and take the mounting ring of the outter flairs use metal tape on them.
-------------------- TEAM XTREME LOUD AUDIO THE LOUD CROWD Team Dc Sound Labs. Posts: 2789 | From: Springfield Ma | Registered: Apr 2004
| IP: Logged |
posted
sometimes two ports make standing wave and cancellation. Have you tried one port of bigger diameter?
-------------------- 12 VOLTS BABY!!!!! TEAM STETSOM USA & SALES REP TEAM STINGER BUY OHIO GENERATORS WORLD FINALS COMPETITOR 2005,2006,2008,2009 SUPER STREET 1-2 CERTIFIED 161.0 DB MARYLANDS LOUDEST DAILY DRIVER N.S.P.L. STATE RECORD HOLDER 2005,2006,2007,2008,2009 TEAM USAudio Stetsom Sales and Service stetsomrep1@hotmail.com Posts: 2226 | From: Maryland | Registered: Oct 2005
| IP: Logged |
posted
I have not tried one port> when i was doing my current set up I was asking if 1 larger port was better than 2 and no one knew for sure but I will do that on the next bow. Im thinking Using pvc tube and making a flaer out of mdf and fiberglass.
Posts: 49 | From: jackson tn | Registered: Jun 2009
| IP: Logged |
posted
Sub up drivers side, port up passengers side, slot port. I would try a 8" port if possible or a slot port of the same area.
Posts: 503 | From: streetsboro,oh | Registered: Jun 2005
| IP: Logged |
Printer-friendly view of this topic