posted
Do you think I could pop a 155 in ssnw with 2 T3 TSNS 18's in the back of my Yukon in boxes similar to my current ones below(7+ cubes ported) with 2 groundpounder 3000d pros on each one?
--------------------
2004 Yukon on 24's 2 Fi BTL 18's 2 Hifonics Brutus BXI2008D's SSNW 1-2 Posts: 1394 | From: Cleveland, Ohio | Registered: May 1999
| IP: Logged |
posted
Sweet looking boxes with good electrical system hmm a 155 is quite possible
-------------------- 95 GMC SAFARI [ASTRO]4 MMATS JUGGS 15'S 4 MMATS D3000.1 24 CUBES 240 SQUARE INCH OF PORT @35 HZ 155+ TL ON THE DASH IN A STREET SETUP Good judgment comes from experience, and often experience comes from bad judgment. Rita Mae Brown Posts: 103 | From: British Virgin Islands | Registered: Sep 2008
| IP: Logged |
posted
I would have fired the ports back and used aero ports instead of a slot port. You need to resin the inside, outside, and also do 45 degree angles in all of the corners inside the box. That will help too, but I think with the way everything is now you won't see over a 152.
-------------------- TEAM SUNDOWN AUDIO 2009 NSPL Car 1801-3600 Watt Record Holder: 151.2db 2009 NSPL Car 3601-Up Watt Record Holder: 152.6db 2009 NSPL Car Hardcore Record Holder: 155.2db 2009 NSPL Car 3601-UP, Car Hardcore, and Car Points World Champion Posts: 1847 | From: The Triad | Registered: Jan 2008
| IP: Logged |
posted
The tsn has a really stiff suspension. In the experience Nick and I have had with the TSN woofers you will need an enclosure that is not daily oriented for that kind of a score. This enclosure is way to large to do anything over really low 50's at the loudest. Not knocking the setup at all though... I am sure it will be great on music.
-------------------- Team Db Linc Team Sundown Team Kinetik Posts: 123 | From: Ohio | Registered: Jan 2007
| IP: Logged |
posted
it's all in the detils, i believe a 55 just may be possible but like i said you are going to need everything to be top notch and no weak links anywhere
-------------------- Bruce Dressel
MTX SounDigital Digital Designs
In loving memory of my sister Kerry Ann Johnson 1970 - 2008
quote:Originally posted by AllNightLong: I would have fired the ports back and used aero ports instead of a slot port. You need to resin the inside, outside, and also do 45 degree angles in all of the corners inside the box. That will help too, but I think with the way everything is now you won't see over a 152.
in my expedition I lose almost half a db by doing angles
--------------------
Posts: 8170 | From: Russellville AL | Registered: Nov 2002
| IP: Logged |
posted
ive already done over a 154 with 2 15s in my tahoe off of 1 7000.1 so if ur going to be running 4 3000ds that shouldnt be a problem i ask a smilar question just too see who's already doing over a 155 with two subs.
quote:Originally posted by odog: ive already done over a 154 with 2 15s in my tahoe off of 1 7000.1 so if ur going to be running 4 3000ds that shouldnt be a problem i ask a smilar question just too see who's already doing over a 155 with two subs.
at a drag show?
--------------------
Posts: 8170 | From: Russellville AL | Registered: Nov 2002
| IP: Logged |
posted
SLIM 823, nice boxes! I always like to double up on the face,did you use any cross bracing inside the box? if not i definately would! in the installs I've done and worked on we've seen as much as a full db going from slot to aero ports! subs up, ports back is what i would do! give about 4"-6" from the ports to the tailgate area also so the box can breathe! thes are just some reccomendation's Good Luck!
--------------------
SS 1-2 competitor! 160+ Representing Team stetsom! Posts: 131 | From: mimisburg ,oh | Registered: Jan 2006
| IP: Logged |
posted
THe only thing is, if i have ports firing back, they will be 2" from the back door, there isnt much room for the port to breathe. I could do it if I made my boxes smaller. right now they are at about 8 cubes each plus port.
Yup I have some cross bracing in there too Ron! The top baffle is doubled also.
I'll have to post a few more pics, but the boxes have been finished for a few months. That photo is from when i was in the process of building the boxes.
--------------------
2004 Yukon on 24's 2 Fi BTL 18's 2 Hifonics Brutus BXI2008D's SSNW 1-2 Posts: 1394 | From: Cleveland, Ohio | Registered: May 1999
| IP: Logged |
posted
i think youd have a better chance if you used 2 12s. More enclosure options.
-------------------- Dustin Page 97 explorer (TOTALLED) 155.8 Team Deaftraps
81 malibu wagon 160+ bassracer--debuting spring 2010
DO NOT DO BUSINESS WITH H&K KENT. HE RIPPED ME OFF FOR OVER $2000. STAY AWAY! Posts: 1126 | From: abbotsford, bc, canada | Registered: Oct 2005
| IP: Logged |
posted
definitely going to need more strength than a single layer of mdf
Posts: 5502 | From: Columbus, OH - formerly FL | Registered: Oct 2003
| IP: Logged |
-------------------- TEAM XTREME LOUD AUDIO THE LOUD CROWD Team Dc Sound Labs. Posts: 2789 | From: Springfield Ma | Registered: Apr 2004
| IP: Logged |
posted
you need a better box, way better box. that design is poor for spl.
and like Waggy said, you'd have better chances with smaller subs.
--------------------
2006 Street A - 152.7 Certified 2007 Street C - 154.8 Certified 2007 Street A - 154.4 Certified 2008 Street C - 156.3 Certified 2008 Street B - 156.6 Certified
TEAM FEAR OF BASS Posts: 3611 | From: Toronto, On, Canada | Registered: Feb 2001
| IP: Logged |
posted
No updates yet. Anything and everything that can take money outa my pocket has happened recently. Hoping to have some updates early 08, I think im gonna stick with my FI's for 2009 then switch it up in 2010. I love 18's though, I may just settle for low 150s with a lil sq & spl. Stay tuned
--------------------
2004 Yukon on 24's 2 Fi BTL 18's 2 Hifonics Brutus BXI2008D's SSNW 1-2 Posts: 1394 | From: Cleveland, Ohio | Registered: May 1999
| IP: Logged |
![[Frown]](frown.gif)
![[Wink]](wink.gif)
Printer-friendly view of this topic