posted
I will be finishing my install this weekend, hopefully. Questions, is my 225.2 bridged to 2 ohm mono going to be too much for my DVC 15? I know at 4 ohms the bc says 650, I'm betting at 2 it will do more like 8-900 or better. That is quite a bit higher than the 500 watts it takes.
Should I just lower the gains some or how should I keep from destroying my sub?
------------------ RF Bass 225.2 DVC 15
Posts: 185 | From: Dijon, France | Registered: Jun 1999
|
posted
You should be fine, that 4" coil will take mondo power. Now, leaving it pinned for several minutes could be hard on it, but as long as you're reasonable there should be no problem.
------------------
And that's the bottom line, cuz: LORD DUKK SAYS SO!
The Big Show The Dukk says: Know your bass: PORT your damn box!! Have HoleSaw, Will Travel!
posted
Adjust your gains when you are competing and then when you are driving in the car. The subs will last for short bursts of high power, just don't use full power when cruising around town.
------------------ True winners never cheat So that makes Tim a real loser Way to go Tim!! F T M
Posts: 169 | From: Duluth, GA | Registered: May 1999
|
Printer-friendly view of this topic