dB Drag: 2004: Team DK - Street A - 151.4 2005: Team DK - H&A - Street Max 1-2 - 160.7 2006: Team DK - H&A - Street Max 1-2 - 162.8 - Super Street - 163.4 2007: Team DK - Street A - 157.2 - Street C - 158.1 2008: Team DK - Super Street 1+ - 154.5
Bass Race: 2007: Team Mickey Mouse - 145.7 2008: Team DK - 149.1
in 2007 it states. 2007: Team DK - Street A - 157.2 - Street C - 158.1
I would like to know from a us judge if the screws in the door and back side pannels are good to go if they are spaced like so
Im sorry to use this pic but its the best pic i see so far and i have a few others like this. I to would like to do so on my yugo.
As well as im wondering if i wrap vinal or if i make a panner out of fiber glass a reverce mold of my stock Plastic pannel of equal thickness or even sand the felt like stuff off it to get to the plastic is this good to go.
Also if this dont work what can i do with in the rules glass my door pannels and add pods will this work here is a pic thanks
Also my hedliner is riping and i want to mat my roof aslong as i stick vinel back up ther is it good or can it just be the mat thanks on this ruling as well. This is all for street b as you can see the back left pannel if falling of at the same time i would like to use the back pocket as a speaker incloser for a 5.1/4 so could i glass them just wondering thanks Im looking for a judge to rule on this or Wayne thanks Tj
Im hoping you can anwser all my ?
-------------------- Team Xtreme Loud Audio. Team Stetsom Usa Street B North East Stetsom Distributor & Rep. 1-413-433-1604 Posts: 1538 | From: Springfield Ma | Registered: Apr 2004
| IP: Logged |
posted
It may be the angle but that port looks way over the window line.
As for DKs build, thats his current install for BassRace, I have no idea if they had those door cards in last year, they may not.
Roof lining has to be replaced, it cant just be mat. It also has to be of similar construction, if it was suspended it has to be suspended.
-------------------- Ben ----- www.EastCoastChoons.co.uk UK SS 1-2 NW Record Holder Team UK - Team ECC - Team RE - Team DD Posts: 2924 | From: Deepest Darkest Norfolk | Registered: Aug 2002
| IP: Logged |
posted
The reason i ask is i have other pic of a street car that is like this. if its not liget then they need to fix this but if its good to go im gona do this i have plans.
-------------------- Team Xtreme Loud Audio. Team Stetsom Usa Street B North East Stetsom Distributor & Rep. 1-413-433-1604 Posts: 1538 | From: Springfield Ma | Registered: Apr 2004
| IP: Logged |
posted
Those doorpanels was judged legal in Sinsheim 2006 (and no, i didnt have a saying in judging this car, as its a danish car.)
Prior to that event, i had a discussion with Team DK, as they knew other competitors had used silicone to glue the doorpanels onto the doors. I told them, they couldnt use any kind of glue, and the doorpanels must be easy removable. Meaning they couldnt seal off the openings between the panel and door with silicone, and they could only use a screwdriver (they had like 10 - 12 screws in each panel then), to remove the panels. (Other competitor couldnt hardly remove their panels, as they was sealed with silicone etc. So they had to cut them loose.)
I really dont like these panels, and there are also other things that i allow only becourse the majority of judges allow it. In fact, i have suggested for several years, that interiors in the Street classes should be STOCK. But it seem, not enough want to change this
oh well, this is part of the reason, that i only focus on Bass Race in Denmark now. Nobody tries to circumvent the rules, nobody bitches about what is allowed and not. Now its just Fun
posted
Cool cool so what did the use for panels and what were they OEM.
And if i can get a USA judge to rule on this i think if its good for over seas it should be good here as well what ya think.
What is the ruling on Thickness of material being used.
The rule book has a lot of gray areas. Thanks for helping out with some info.
-------------------- Team Xtreme Loud Audio. Team Stetsom Usa Street B North East Stetsom Distributor & Rep. 1-413-433-1604 Posts: 1538 | From: Springfield Ma | Registered: Apr 2004
| IP: Logged |
posted
Panel thickness is clearly stated in the rule book.
Its imp and Im a metric man, its under 4mm though.
-------------------- Ben ----- www.EastCoastChoons.co.uk UK SS 1-2 NW Record Holder Team UK - Team ECC - Team RE - Team DD Posts: 2924 | From: Deepest Darkest Norfolk | Registered: Aug 2002
| IP: Logged |
posted
What kinds of meteral can i use if my oem is plastic can i use plastic some info on this please and how thick dose it needs to be covering the original area.
-------------------- Team Xtreme Loud Audio. Team Stetsom Usa Street B North East Stetsom Distributor & Rep. 1-413-433-1604 Posts: 1538 | From: Springfield Ma | Registered: Apr 2004
| IP: Logged |
posted
ttt Can i get a us judge to rule on this thanks
-------------------- Team Xtreme Loud Audio. Team Stetsom Usa Street B North East Stetsom Distributor & Rep. 1-413-433-1604 Posts: 1538 | From: Springfield Ma | Registered: Apr 2004
| IP: Logged |
-------------------- TEAM SOUNDSTREAM STREET A "Sex is like art. Most of it is pretty bad, and the good stuff is out of your price range" Posts: 649 | From: Iowa | Registered: Apr 2004
| IP: Logged |
posted
that post is about amps on the seat (actually asking about removing the rear seat for an amp. TJs amp is legit im pretyy sure, as his seat can still fold back and lock
-------------------- Team Maxxsonics T3 Audio Posts: 5933 | From: Albany | Registered: May 2002
| IP: Logged |
posted
Need some ruling on the topic please judges thanks USA Judges.
Thanks for answering the questions over seas.
But i here to many things that are ok that some over here say no. So know what is good there is not here how is this fair I just need a ruling so i can copy past it so when i go to finales there is no taken words out of anyone's mouths.
I hate gray area`s and i to want to play by the rules just like every one els should be. So a ruling on this is needed. Not to step on any ones toes. I just would like to get a start on a new begining.
-------------------- Team Xtreme Loud Audio. Team Stetsom Usa Street B North East Stetsom Distributor & Rep. 1-413-433-1604 Posts: 1538 | From: Springfield Ma | Registered: Apr 2004
| IP: Logged |
posted
You should try sending a PM to Bill and Erie and see what they say, maybe send one to Sam too. This would be faster than waiting for one of them to reply to this post. I have Bill and Erie's phone numbers too, let me know if you wanna call them instead.
Plastic of the same type and thickness or MDF/ply in the thickness stated in the rule book.
Its written down, follow the rules and you will be fine.
-------------------- Ben ----- www.EastCoastChoons.co.uk UK SS 1-2 NW Record Holder Team UK - Team ECC - Team RE - Team DD Posts: 2924 | From: Deepest Darkest Norfolk | Registered: Aug 2002
| IP: Logged |
![[Frown]](frown.gif)
![[Smile]](smile.gif)
![[Razz]](tongue.gif)
Printer-friendly view of this topic