posted
cool just making sure dont need my # to change on moven the location on the glass. lol all though a few inches i do see a db jump. lol This yr is gona be funnnnnnnnnnnnnnn.
-------------------- TEAM XTREME LOUD AUDIO THE LOUD CROWD Team Dc Sound Labs. Posts: 2789 | From: Springfield Ma | Registered: Apr 2004
| IP: Logged |
posted
HOw about putting this rule with pic into the rule book?
-------------------- Cactus Sounds Life Begins After 5 World Championships. WR Holder SM 165.8db 5 x World Champ 4 x Euro Champ 4 X Swiss Champ 03 Loudest Smart In The World Posts: 7714 | From: Switzerland | Registered: Apr 2003
| IP: Logged |
posted
it seem s that the pics van tor dont work any more
if some body has them please post them again
and how is the rule to mesure
is it sensor to seat with the sjablon or from the spot on the window to seat
thanks
-------------------- proud member of team carmania 2007 street A 156.1 2008 street max 159.9 2008 super street 3-4 168.1 2009 street max 163.2 with 2 amps 2009 super street 3-4 168.3 2009 street B 161 and world champion Posts: 233 | From: holland | Registered: Oct 2007
| IP: Logged |
but now i need to know how to messure between window and front seat or between sensor and front seat
-------------------- proud member of team carmania 2007 street A 156.1 2008 street max 159.9 2008 super street 3-4 168.1 2009 street max 163.2 with 2 amps 2009 super street 3-4 168.3 2009 street B 161 and world champion Posts: 233 | From: holland | Registered: Oct 2007
| IP: Logged |
quote:Originally posted by team carmania: oke thank you
but now i need to know how to messure between window and front seat or between sensor and front seat
All reflective surfaces, with the exception of the windshield and dashboard, must be located a minimum of 12 inches (30.48 cm) from the measurement sensor. (Intent: Reflective surfaces shall not interfere with the measurement equipment.) For clarification purposes, the dBDRA considers any surface greater than 3/8" (9.525 mm) in width to be a reflective surface.
-------------------- Team DD Belgium - Dieter 2004: 153.2dB @ dB-Drag Street A certified 2005: 156,5dB @ dB-Drag Street A certified / 159.1dB @ IDBL Stock 1 worldrecord 2006:157.5 dB @ dB-Drag Street A certified 2007: 158.2 dB Worldrecord Street A / 158.3 dB @ dB-Drag Street A certified 2008: Benelux dB-drag judge Posts: 796 | From: Belgium | Registered: Sep 2003
| IP: Logged |
quote:Originally posted by augustijnen Peter: i think what he meens is
does he need to messure with sensor in or can he messure from the sensor spot( without sensor)
See my post above Seat has to be 12" from the sensor itself.
-------------------- Team DD Belgium - Dieter 2004: 153.2dB @ dB-Drag Street A certified 2005: 156,5dB @ dB-Drag Street A certified / 159.1dB @ IDBL Stock 1 worldrecord 2006:157.5 dB @ dB-Drag Street A certified 2007: 158.2 dB Worldrecord Street A / 158.3 dB @ dB-Drag Street A certified 2008: Benelux dB-drag judge Posts: 796 | From: Belgium | Registered: Sep 2003
| IP: Logged |
posted
oke but why all judge have an sjablon off 33.1 cm and not the 12" (30.48 cm ) what you say dieter ? we also tink always 30.5 cm and now they have sjablon off 33.1 cm why ?????
-------------------- proud member of team carmania
super street no wall max score 163.8
Posts: 29 | From: holland | Registered: Mar 2009
| IP: Logged |
posted
Sorry for the missing pics, it was my pics but i have closed the webhotel where the was hostet. Mikes drawing is correct, but quite ugly
The mig-jig is ofcorse longer than 12", as there is 12" from the end to the middle of the "cut-out". So if you use the mig-jig to measure from the sensor to the seat, you must place the mig-jig under the sensor, so the middle of the "cut-out" is at the same plane as the sensors edge that is close to the seat. Hope it makes sense
-------------------- - Lawaetz - www.lydtryk.dk Bass Race & dB Drag Racing Denmark
quote:Originally posted by Lawaetz: Mikes drawing is correct, but quite ugly
Do it better in 1 minute
Yeah, you right, the cut out hole from the micjig is the measurepoint from sensor point to all around it. I everytime set the micjig to the windowoutside and the cutout is at the sensorpoint. If there is something in the way around the circle, the competitor have to remove it...
Regards Mike
-------------------- Mike Dupont Head Judge dB Drag Racing
-------------------- proud member of team carmania 2007 street A 156.1 2008 street max 159.9 2008 super street 3-4 168.1 2009 street max 163.2 with 2 amps 2009 super street 3-4 168.3 2009 street B 161 and world champion Posts: 233 | From: holland | Registered: Oct 2007
| IP: Logged |
-------------------- proud member of team carmania 2007 street A 156.1 2008 street max 159.9 2008 super street 3-4 168.1 2009 street max 163.2 with 2 amps 2009 super street 3-4 168.3 2009 street B 161 and world champion Posts: 233 | From: holland | Registered: Oct 2007
| IP: Logged |
![[Big Grin]](biggrin.gif)
![[Wink]](wink.gif)
![[Smile]](smile.gif)
Printer-friendly view of this topic