Author
Topic: is this diagram right?
Looks right! Long as ya keep all your batts paralleled you should be fine....
Raymondnoodle
Member
posted 05-21-2003 10:10 PM
Looks right! Long as ya keep all your batts paralleled you should be fine....
Posts: 393 | From: San Ramon, CA | Registered: Nov 2001
| IP: Logged |
what would change if it were in series?
poonuttybuddy
Senior Member
posted 05-22-2003 04:46 AM
what would change if it were in series?
Posts: 728 | From: va | Registered: Feb 2003
| IP: Logged |
it would jump up to 24 volts.
Magus2727Focus
Senior Member
posted 05-22-2003 05:20 AM
it would jump up to 24 volts.
Posts: 505 | From: Canton, MI | Registered: Mar 2003
| IP: Logged |
i mean as to wiring what would be changed?
poonuttybuddy
Senior Member
posted 05-22-2003 07:44 AM
i mean as to wiring what would be changed?
Posts: 728 | From: va | Registered: Feb 2003
| IP: Logged |
Any run of wire that goes from the front of the car to batteries in the back needs to be fused at both ends.http://www.sounddomain.com/id/nomad84
Nomad84
Senior Member
posted 05-23-2003 04:12 PM
Any run of wire that goes from the front of the car to batteries in the back needs to be fused at both ends.http://www.sounddomain.com/id/nomad84
Posts: 1830 | From: Oklahoma | Registered: Sep 2002
| IP: Logged |
You need to hook +to+ on all bats and -to- on the back two bats and ground the last bat and the 1st bat. Make sure that you have two fuses between the 1st and 2nd bat. 1 just after the 1st and 1 just before the 2nd. To mess up and get a 24volt load you would run +to- but that will suck!
ss454
Senior Member
posted 05-23-2003 04:46 PM
You need to hook +to+ on all bats and -to- on the back two bats and ground the last bat and the 1st bat. Make sure that you have two fuses between the 1st and 2nd bat. 1 just after the 1st and 1 just before the 2nd. To mess up and get a 24volt load you would run +to- but that will suck!
Posts: 3279 | From: North Little Rock, Arkansas | Registered: Apr 2003
| IP: Logged |
Printer-friendly view of this topic