posted
I purchased this amplifer recently and im after any information you may have on it.
US Amps USA 6000.
1 x 6000w RMS Class A/B @ 2 ohms @ 12.6 volts.
This amp has been custom modified by Dirk to do about 7000w @ 15volts.
The SAT has been disabled to allow 1.5 ohm safe running or lower with a good power supply. It was running happily at 1 ohm in mbh69s car when he had a XA3000D die for ice direct show.
This is THE LAST USA-6000 to be produced
Specs from USAmps site Two Channel Class AB Amplifier Total Power Output: 6000 Watts RMS 3000 Watts x 2 into 1 Ohms 6000 Watts Bridged into 2 Ohms THD at Rated Power: 0.1% Signal/Noise Ratio: >105dBA Frequency Response: 5Hz-50KHz Damping Factor: >2500 Fuse Rating: 900 Amps Dimensions: 114mm / 4.50in High 229mm / 9.0in Wide 629mm / 24.75in Long Weight: 14.52kg / 32.00lb Variable 24dB Low-Pass Active Crossover
This is not the double d. this amp is class a/b im after any info on reliablity and also i would like to know how to bridge this amp to do 6krms at 2 ohms
thanks for any help
Posts: 2 | From: uk | Registered: Jul 2009
| IP: Logged |
![[Eek!]](eek.gif)
Printer-friendly view of this topic