posted
ok that what happen to me one of my dd 9915 blow and the amp when down so murilo are sure that the sd amp want go out like the stetsom
Posts: 52 | From: shreveport,la | Registered: Feb 2009
| IP: Logged |
posted
For sure the amp is what it is i have done lots of testing with mine and im happy the amp is well built and will do everything Murilo says it will all i have to say is don't Knock them till ya try them and I have tried many amps and this is by far one of the best amps that i have played with Just think of it this way you can get built production and 1 out of every 1000 is tested or ya can get a quality hand built spend a lil more and know that everyone is tested from start to end.
I know what i would get and for what ya can get for true power its well worth every cent spent and for the reliably its about 90% bullet proof. the other 10% is carelessness so if your good with your stuff this is a sick amp.
To get 14k on a 8k amp at 1.7 ohm on a amp that makes it ratted power at 1 ohm well i would say that's sick.
-------------------- TEAM XTREME LOUD AUDIO THE LOUD CROWD Team Dc Sound Labs. Posts: 2789 | From: Springfield Ma | Registered: Apr 2004
| IP: Logged |
-------------------- TEAM XTREME LOUD AUDIO THE LOUD CROWD Team Dc Sound Labs. Posts: 2789 | From: Springfield Ma | Registered: Apr 2004
| IP: Logged |
posted
yup yup that it is i love this car they get loud as well.
-------------------- TEAM XTREME LOUD AUDIO THE LOUD CROWD Team Dc Sound Labs. Posts: 2789 | From: Springfield Ma | Registered: Apr 2004
| IP: Logged |
posted
I was hoping some one can help me? I was at a show this past weekend and seen theses 12ks and an 8000 at work!! can you tell me what ohm load (after rise) and what voltage you can see rated power out of these amps? After seeing an undisclosed clamped power output from the 12k and watching the 8000 go up in smoke? not sure what to think about the product? I am not saying that this is bad equipment but people can say anything to sell a product and from what I have seen this weekend I was not impressed in a real world test? i am sure that this was an isolated case but can some one post some actula test results with voltages and apms for there power ratings? I think that this could be a strong product and would like to learn more about the product line? thank you for your help
-------------------- TEAM DB UNIT (Master Yoda) 2006 Competition Only Hardcore Points Champion 2006 Competition Only Trunk Stock Points Champion 2007 Competition Only Trunk Stock Points Champion 2008 Competition Only Overall Points Champion http://www.competitiononly.com/ Authorized Second Skin Dealer www.secondskinaudio.com [IMG]
posted
i got 10431 watts at .5 rising to 2.20 ohm. it was 151.4v and 68.9 amps ac and 162.6. in craigs van it was 100v 140amps of current for 14000 watts. he was at .25 ohm and rising to .72 which was too low. we may have gotten more out of it at .35, i'm sure i could have in the jeep. it's still one of if not the strongest amp i've ever tested.
posted
nice!! thanks for the udate Ryan!! it looks Like I may be in the market for some new amps soon!!!
-------------------- TEAM DB UNIT (Master Yoda) 2006 Competition Only Hardcore Points Champion 2006 Competition Only Trunk Stock Points Champion 2007 Competition Only Trunk Stock Points Champion 2008 Competition Only Overall Points Champion http://www.competitiononly.com/ Authorized Second Skin Dealer www.secondskinaudio.com [IMG]
quote:Originally posted by Master Yoda: I was hoping some one can help me? I was at a show this past weekend and seen theses 12ks and an 8000 at work!! can you tell me what ohm load (after rise) and what voltage you can see rated power out of these amps? After seeing an undisclosed clamped power output from the 12k and watching the 8000 go up in smoke? not sure what to think about the product? I am not saying that this is bad equipment but people can say anything to sell a product and from what I have seen this weekend I was not impressed in a real world test? i am sure that this was an isolated case but can some one post some actula test results with voltages and apms for there power ratings? I think that this could be a strong product and would like to learn more about the product line? thank you for your help
Hello, we would never sell an amp weaker than we rate it, and to do so we always underrate the amps. SD12kD is capable of 12kW at 12.6V and more than 18kW at 16V.
quote:Originally posted by Master Yoda: I was hoping some one can help me? I was at a show this past weekend and seen theses 12ks and an 8000 at work!! can you tell me what ohm load (after rise) and what voltage you can see rated power out of these amps? After seeing an undisclosed clamped power output from the 12k and watching the 8000 go up in smoke? not sure what to think about the product? I am not saying that this is bad equipment but people can say anything to sell a product and from what I have seen this weekend I was not impressed in a real world test? i am sure that this was an isolated case but can some one post some actula test results with voltages and apms for there power ratings? I think that this could be a strong product and would like to learn more about the product line? thank you for your help
I did not see a SD8000 burn up at the show! And the only one I know of that had the SD8000's was my team mate! We will see what they do, I'm going to run one in my car!
-------------------- 3600+ TRUNK WORLD RECORD HOLDER! 152.7 SD8000 & 2 DD9512g's in the trunk! TRUNK HARDCORE WORLD RECORD HOLDER! 0-24" TRUNK WORLD RECORD HOLDER 147.2+ with a US AMPS 4000x " WHY BUILD A BEAST WHEN YOU CAN HAVE A MONSTER!" Posts: 148 | From: Dunn,NC | Registered: Jun 2007
| IP: Logged |
posted
murilo its jim in cali i heard your amps had a problem getting hot after a couple of minutes , i need it to run for every day use as well as db drag, also how low can you drop the ohmage and still burp it saftley.. jim king of cali street b 2009 150.1
Posts: 12 | From: san carlos ca | Registered: May 2009
| IP: Logged |
posted
I play mine daly Jim @ 1.7 in my b setup with rise. At the amp im at .5 Whats the rise you see in your b set up if your above 1ohm you should not have a prob as long as you rise to one ohm the amps need venting they have internal fans and as long as air can get at them they will be fine.
-------------------- TEAM XTREME LOUD AUDIO THE LOUD CROWD Team Dc Sound Labs. Posts: 2789 | From: Springfield Ma | Registered: Apr 2004
| IP: Logged |
posted
old school have you talked to murilo in the last couple of days i cant seem toget a hold of him so i can order my amps ,if so can you tell him to call me in cali .hes got my #
Posts: 12 | From: san carlos ca | Registered: May 2009
| IP: Logged |
posted
There are people bass racing these amps. I was told there is no warranty running them below 1 ohm but thats ok since they seem to do the best at 1 ohm. And when I say 1 ohm I mean before box rise.
I don't state that measurment unless specifically asked. Your going to blow alot of amps trying to run the amp daily at .25 ohm just to get your rise to 1 ohm.
Murilo is hard to get ahold of because he is working on a van for this weekends 2x in Winnipeg.
-------------------- -Donald Hebig -All Out S.P.L. Saskatchewan's dB Drag event promoter -Check the Termpro homepage partners for the companies I support. Posts: 2600 | From: Borden, Saskatchewan. Canada | Registered: Feb 2000
| IP: Logged |
-------------------- TEAM XTREME LOUD AUDIO THE LOUD CROWD Team Dc Sound Labs. Posts: 2789 | From: Springfield Ma | Registered: Apr 2004
| IP: Logged |
quote:Originally posted by dB Don: There are people bass racing these amps. I was told there is no warranty running them below 1 ohm but thats ok since they seem to do the best at 1 ohm. And when I say 1 ohm I mean before box rise.
I don't state that measurment unless specifically asked. Your going to blow alot of amps trying to run the amp daily at .25 ohm just to get your rise to 1 ohm.
Murilo is hard to get ahold of because he is working on a van for this weekends 2x in Winnipeg.
I here ya on that .25. These amps make real nice power at 1.8 - 1.2 ohms with rise i know the 8k in our test was doing 14k + on 16 volts at 1.7with rise.
-------------------- TEAM XTREME LOUD AUDIO THE LOUD CROWD Team Dc Sound Labs. Posts: 2789 | From: Springfield Ma | Registered: Apr 2004
| IP: Logged |
quote:Originally posted by Bernie Madoff: Is anyone Bass Racing with these amps?
Look on youtube there is many that bass race them. you ok bro or did ya forget about this must be one to many bass runs.
-------------------- TEAM XTREME LOUD AUDIO THE LOUD CROWD Team Dc Sound Labs. Posts: 2789 | From: Springfield Ma | Registered: Apr 2004
| IP: Logged |
posted
thanks old school ,just tell him i need to order a tsd 8k and a 12k, but i need to order this week or early next.tell him to email myself or greg, please
Posts: 12 | From: san carlos ca | Registered: May 2009
| IP: Logged |
posted
I'm in Toronto driving back to Winnipeg, no Internet.
Don you know that .25 will be 1 ohm only after a 4x Imp rise (usually 2.5 to 3 on vented boxes) and at some freqs, if the guy wire the amp at .25 and try to play music it won't be clever.
quote:Originally posted by murilo@soundigital.com.br: I'm in Toronto driving back to Winnipeg, no Internet.
Don you know that .25 will be 1 ohm only after a 4x Imp rise (usually 2.5 to 3 on vented boxes) and at some freqs, if the guy wire the amp at .25 and try to play music it won't be clever.
Thats what I just said.
-------------------- -Donald Hebig -All Out S.P.L. Saskatchewan's dB Drag event promoter -Check the Termpro homepage partners for the companies I support. Posts: 2600 | From: Borden, Saskatchewan. Canada | Registered: Feb 2000
| IP: Logged |
![[Big Grin]](biggrin.gif)
![[Confused]](confused.gif)
![[Wink]](wink.gif)
![[Razz]](tongue.gif)
![[Embarrassed]](redface.gif)
Printer-friendly view of this topic