posted
Ive been trying to get the specs from us amps on the 2000X, so I can figure out what it can do at what impedance ower wise. here are my emails,
I have 2 - 2000x's and am considering running them each at 2 ohms and getting 2 more, for a total of 4-2000x's on 2-DD9512's(dual 2 ohm). I’m an engineer and was wandering if you could give me the power supply rail info that you supply for all your other amps. I am interested in the supply voltage and current capabilities of the amp. I figure my speakers D.C. resistance will rise a little once warm, and I am trying to figure out at what impedance I will get the most power out of the amp. Thanks, Mike Mcpherson
Mike,
The power supply rail voltage is 65 volts.
The mosfets on the output side are 75 amps/ 55 volts, and there are 24 of them.
Thank you, USAmps
What about the power supply current? Thanks, Mike
Mike,
60 volts , 50 amps.
Thank you, USAmps
as far as the replys go, does anyone know what spec is for what?
------------------ 2-DD 9512's 2-2000X's (for now) 8.0ft^3 box in a civic trunk One big ass port ?????dB's
Posts: 1269 | From: Fullerton. CA ,USA | Registered: Oct 1999
| IP: Logged |
posted
Is it me or do those replys not agree with each other.
65V power rails with 55V mosfets on the amp section?
then it says 60V? 60V where?
Im gonna have to call them or something.
If anybody knows, Im just looking for the max rms voltage and max current of the amp. The power supply voltage and current would be good too. (I can approximate the output from there)
------------------ 2-DD 9512's 2-2000X's (for now) 8.0ft^3 box in a civic trunk One big ass port ?????dB's
Posts: 1269 | From: Fullerton. CA ,USA | Registered: Oct 1999
| IP: Logged |
Printer-friendly view of this topic