EPX2 Symmetry

my profile | directory login | register | faq | forum home

»	Termpro Audio Forum » Our Archives » General Audio (1999-2001 Archives) » EPX2 Symmetry

UBBFriend: Email this page to someone!

Author

Topic: EPX2 Symmetry

I want to seperate the display from the keypad/motherboard in the RDAT. The problem I'm having is that I can't find the 15 pin inline connectors so that I can make a ribon cable. I really don't want to have to solder directly to the RDAT, but I am running out of places to look. BTW, Rockford has been of no help with these.Can anyone help me obtain these connectors? I need a male and a female, they are 1.2 inches from pin 1 to pin 15.------------------

AVAWAVA
New Member
Member # 143

posted

I think I have finally found the place to ask this question.

Can anyone help me obtain these connectors? I need a male and a female, they are 1.2 inches from pin 1 to pin 15.

------------------

Posts: 2 | Registered: Jun 1999 |

You might want to try digikey. www.digikey.com If they don't have it, you will probably have to solder your ribbon cable directly to the pc board.------------------
"Keep it Loud and Make me Proud!"Wayne Harris
www.termpro.com

Wayne Harris
Administrator
Member # 2

posted

The pinstrip connector that is being used is very unusual. When I originally designed the EPX/RDAT, I had a very difficulat time finding a connector with this spacing. (The hole spacing on the LCD module required this spacing.)

You might want to try digikey. www.digikey.com

If they don't have it, you will probably have to solder your ribbon cable directly to the pc board.

------------------
"Keep it Loud and Make me Proud!"

Wayne Harris
www.termpro.com

Posts: 5343 | From: Austin, TX | Registered: May 1999 |