posted
I just got my 360 today and got the software loaded on my palm.
Seems simple enough. Basic eq and crossover.
I can't wait to pull my dash apart and see what this puppy can do!!!
So my question is ...
How should my amplifers be set? Should I set them to full pass?
How should my head unit be set? ( I already have guessed to set everything flat on the headunit ).
Here is the equipment I have and whats going to it -
I have a Double Din Panasonic DVD player in dash
Qlogic kicks with Memphis SQ series 5 1/4 componants on a Crossfire 404 ( 4 channels running each speaker in the kicks IE: 50 watts to each tweeter and eash mid )
Pioneer Premier kevlar 6x8 coaxles in the doors running off a Crossfire 302 ( 75 watts to each door )
I have 4 Memphis MC124's running off an Incriminator 20.1 ( LOTS A POWER!!! )
I have some crossfire 5x7's running off the head unit for some "rear fill" and surround on the prologic side of the deck.
I have a spare Crossfire 600.1 installed for future use ( thinking center front sub )
now, my plans are to use the "front" signal off the head unit to control the speakers "up front". I plan on "y"ing the front signal into the front and rear channel of the 360.
Now if I do this, I wont be able to use the 360 to control my tweeters seperate from my mids in my kickpanels, but I would be able to control my kicks seperate from my door speakers.
now, am I right by leaving the rear most speakers on the head unit?
Should I run the kicks off the 300.2 and the doors and rears off the 400.4?
Ideas, comments?
-------------------- See you in the lanes,
dBSteve Get Loud Productions LLC Posts: 8597 | From: Midwest | Registered: Aug 2000
| IP: Logged |
Printer-friendly view of this topic