posted
premier with the usb port on front will use a 16gig thumb drive just found that out today and use cd for tones deh-p510ub alot of features.
-------------------- now with (TEAM LOW BUDGET)148.1db @43hz and gaining slow lol. street B setup 2000 4 door s-10 blazer 2-mojo 12's powered by 2-bxi1610d's burp box not built yet. add me to myspace if you want atv_man2007 Posts: 78 | From: paintsville ky | Registered: Jul 2008
| IP: Logged |
-------------------- TEAM XTREME LOUD AUDIO THE LOUD CROWD Team Dc Sound Labs. Posts: 2789 | From: Springfield Ma | Registered: Apr 2004
| IP: Logged |
posted
Just upgraded from a kenwood z919 to a Alpine CDA-9884Ji version. The American version is 2v but the japan one is 4v!
For the Alpine users, So far.... what setting have you found to be the best for you? ex. sub woofer volume Bass level HPF, LPF..etc I know most people will say test and find out but just trying to find out from experienced users now.
--------------------
Team D.I.Y TEAM MAXXSONICS (Feel the Power!) TEAM Cactus Sounds (Japan) LFG Fareast. He may not come when you want but, he's always right on time! Posts: 1874 | From: Fukushima, Japan | Registered: Mar 2005
| IP: Logged |
quote:Originally posted by Gavin: Just upgraded from a kenwood z919 to a Alpine CDA-9884Ji version. The American version is 2v but the japan one is 4v!
For the Alpine users, So far.... what setting have you found to be the best for you? ex. sub woofer volume Bass level HPF, LPF..etc I know most people will say test and find out but just trying to find out from experienced users now.
in my limited experience with an alpine (used one in my one week long crx build and was loaned one for two weeks to try in my explorer to keep my amps out of protect using the mute roll) I didnt get much chance to play around but these were the settings I used.
Subout -> +15 (maxed) bass -> 0 bass freq-> 50 hz (explorer burped at 49hz) bandwidth-> 1 I think? (narrowest one) volume -> 23 out of 35 LPF-80 hz HPF -not used on head unit
settings with the crx were the same for sub out (+15) and burp volume (23).
Final results were crx 152.9 in testing (152.0 at a 1x) this was my first crx install ever done and bought the car...did some engine and front suspension work, installed batt, ran wire, built boxes, threw everything in and tested in 6 days to get that score. Used 2 solo X 10s and 2 memphis mojo 4kw's strapped at 0.5 ohm off a single 2150 with 8 runs. was street A legal in 07
Final results for the explorer were 157.8 db in testing and 154.9 db (same setup on one amp) at a 1x. Using 6 solo X 10s and 4 AB500.1s with 2 nsb90s and 40 runs of 1/0 total. was street C legal
-------------------- Dustin Page 97 explorer (TOTALLED) 155.8 Team Deaftraps
81 malibu wagon 160+ bassracer--debuting spring 2010
DO NOT DO BUSINESS WITH H&K KENT. HE RIPPED ME OFF FOR OVER $2000. STAY AWAY! Posts: 1126 | From: abbotsford, bc, canada | Registered: Oct 2005
| IP: Logged |
posted
Thanks Dustin, The subwoofer volume had me baffled a bit. at least I have a starting place now.
Anyone else?
--------------------
Team D.I.Y TEAM MAXXSONICS (Feel the Power!) TEAM Cactus Sounds (Japan) LFG Fareast. He may not come when you want but, he's always right on time! Posts: 1874 | From: Fukushima, Japan | Registered: Mar 2005
| IP: Logged |
posted
i would o scope it gavin and see where it clips at with everything at 0 first becasue i have seen testing where the sub being at max like that hurt more then help but i would get a clean signal first then just test sub +1 then +2 or what and see where its at for u being that head unit is different over there then here and nice looking head unit and clad to see it is a 4 volt not 2 like over here lol
Printer-friendly view of this topic