posted
My alarm/remote start and all works fine, everything is cool except when i DISARM it, the doors wont unlock, but when i arm it, they will lock. any ideas? oh yeah its on a 2000 grand am, and theres a relay controling the locks.thanks!
Posts: 29 | From: Bethesda, MD | Registered: Feb 2002
| IP: Logged |
hey you responed to my post on termpro, i was wondering if u could help me out a litle more:
ive checked it a thousand times, heres the set up:
theres a 3 pin mini plug with a blue, red, and green wires,this goes to the relay, then from the relay there is a violet wire and a violet/black wire that is FUSED and then turns to one violet/black wire that goes to ground. there is one blue/black and one green black, these wires are spliced together about 14 inches from the relay, they are spliced together to another green/black wire that goes to a white wire on one of the factory harnesses.
I used a multimeter and testing the green/black wire. the wire is 12v constant, when i push lock button on the car it goes to 0 volts, when i push unlock on the car, it goes to 6 volts. when i push arm on the the remote the wire goes to 0 volts, but when i push disarm on the remote, the wire goes to 11volts?? ive checked all the %^&* connections a million times!! help!!
Printer-friendly view of this topic