posted
i was using liquid nails and had jus coverd the top of it after i was done, the next day it was a lil hard on the inside and i had to sqeeze some out, i figuerd y waiste it tho, and i picked a good spot to glue and i glued it and the lil hard solid part came out and i picked it out w/ my finger and layed it next to me on another peice o wood and started messin with the biscut cus it slipped, well it wouldnt quite go in place and kept messin w/ it and rested my elbow the peice o wood and kept figiting w/ it, well i layed my arm rite on the glue peice,but it was really hot out (i was outside) and i was swetting so i didnt notice it, well go figuer by the time i was done messin w/ the biscut i didnt want to let the bored go for feer it would slip, so i held it till it kinda dried, needless to say, i have a chunk out o my arm, a waisted peice o wood (maybe usable), and a doctor bill
now please tell me im not the only moron, any one else done anything like this?
posted
I once cutout the speaker holes for a pair of baffles to be BOTH left speakers. I've never had the misfortune of popping a drill or screwdriver through a suspension. **** happens, that's why I use clamps.
Posts: 768 | From: Ottawa, On, Canada | Registered: May 2000
| IP: Logged |
posted
drill through a surround, and a drill w/ phillips head bit through my finger, ended up passing out at my friends house on his steps. woke up about 2 hours later
Posts: 7 | From: VA | Registered: Aug 2002
| IP: Logged |
posted
i fiberglass resin'ed the seat of my pants to the bottom of the enclosure one time. Was workin on the inside of the wall, adding some resin to the front baffle at 3 a.m. and before a show. Knocked over the container with resin, and spilled over the bottom. didn't even think twice about cleaning it up(it was late) 10 minutes later, went to get out...i couldnt move, the resin dried and glued my shorts to the bottom of the enclosure...luckily my friend was able to pull me out. needless to say i had to throw the shorts away.
-------------------- "The cause and solution to all of Car Audio's problems" That Beerhat Guy 1 C-V Stroker 12d2 ID 6.5 components Kicker XS100 and ZR360 Posts: 251 | From: Houston,Tx | Registered: Sep 2000
| IP: Logged |
posted
"i was using liquid nails and had jus coverd the top of it after i was done, the next day it was a lil hard on the inside and i had to sqeeze some out, i figuerd y waiste it tho, and i picked a good spot to glue and i glued it and the lil hard solid part came out and i picked it out w/ my finger and layed it next to me on another peice o wood and started messin with the biscut cus it slipped, well it wouldnt quite go in place and kept messin w/ it and rested my elbow the peice o wood and kept figiting w/ it, well i layed my arm rite on the glue peice,but it was really hot out (i was outside) and i was swetting so i didnt notice it, well go figuer by the time i was done messin w/ the biscut i didnt want to let the bored go for feer it would slip, so i held it till it kinda dried, needless to say, i have a chunk out o my arm, a waisted peice o wood (maybe usable), and a doctor bill
now please tell me im not the only moron, any one else done anything like this?"
THANKS PROPHESIZED FOR MAKING THAT POST IMPOSSIBLE TO READ! LOL
Printer-friendly view of this topic