posted
so i got jacked and decided that an alarm would be a good buy. anyways, everything is working except for the remote start.
i have one wire that hooks to the Door Lock ACC that i have not connected. i understand that this is a constant hot but i didnt know if it needed to be hooked up since i have a negative touch off system. could this non connected wire be the cause my remote start is not working?
Posts: 2 | From: Jacksonville | Registered: Nov 2005
| IP: Logged |
posted
its a 97 accord and the brain has a baton alarm logo on it. i dont know if that will help or not. the alarm is a two way lcd etc...
Posts: 2 | From: Jacksonville | Registered: Nov 2005
| IP: Logged |
posted
if the wire is comeing out of a 3 pin plug alng with the trigger wires for the locks then no(its for relays if needed, but i still wouldent use it anyways) Some alarms need tach to be programed first befor the start will work, some have netruel safty wires that need to be grounded, some have a toggle switch that needs to be grounded and engaged, could be anything, was there anything else you did not hook up?
-------------------- WWW.DCSOUNDLAB.COM Team Hifonics Voted 2004 DB Drag Rookie of the year 2004 World Finals 3rd place finish SS1-2NW 2005 World Finals 4th place finish SS1-2NW 2006 World Finals 3rd place finish SS3-4 2006 Super Street DeathMatch Participant 2007 Super Street 3-4 163.1 with 2 amps 2007 West Coast SS3-4 Champion Posts: 3002 | From: West Coast | Registered: Nov 2003
| IP: Logged |
![[Smile]](smile.gif)
Printer-friendly view of this topic