posted
hello hers my ? i have a viper 550 alarm with a clifford back up battery /siren it was all hooked up great with no problems then it got removed for engine work and i need to know what wires from the back up siren/battery go where
black wire goes to car ground red wire goes ? white wire ? oarnge wire ?
thanks big jim
------------------
Posts: 1092 | From: [] Field or fairfield ca | Registered: Jul 1999
| IP: Logged |
posted
Jim I cannot answer your question, but I did some quick research, using my awesome links page BTW. Which can be found at http://members.aol.com/quadziman
Here it is, For Viper info, visit them online at http://www.directed.com or to automatically be connected to your nearest dealer simply call toll free 1-800-283-1344. (Please call them between 10 a.m. and 5 p.m. local time).
For Clifford info, visit them online at http://www.clifford.com or call the 24-hour toll-free 1-800-CLIFFORD hotline for their local Authorized Clifford Dealers).
I bet one of the dealers might tell you. If not E-mail the proper company from their website.
Hope this helps, David McLean
------------------ Team Quadzilla
Member of The Florida dB Drag Team "HURRICANE WARNING-High Winds, Extreme Pressure-Be Prepared"
posted
The Clifford siren has three wires going to it, Red is for 12v, Black is for Ground and Yellow goes to a negative siren output. If your alarm has a positive out you need a relay to reverse the polarity. You can also use an output on the alarm that activates when the alarm is triggered.
------------------ Shaughn Murley Extreme Audio By Design TEAM HERTZ CANADA Western Regional Manager
Posts: 128 | From: Red Deer, AB, Canada | Registered: Nov 1999
| IP: Logged |
Printer-friendly view of this topic