posted
I have a TD-45z and an MB-70 (in-dash changer) that I need to install in my 93 Accord (supposedly double-din). When I put the two HU's in the empty slot to see how much space I had to work with for mounting, I barely even had 1/8" left. Would anyone know how I would go about installing these HU's? My plan was to mount them with a smoked Lexan bracket, but that's not looking to good right now...thanks.
------------------
Posts: 35 | From: Downers Grove, IL | Registered: Apr 2000
| IP: Logged |
posted
did the factory radio use an ISO mount? If so, you could just bolt them to it, stick 'em in the car, and then trace they're outline onto the lexan and cut out the openings, then measure the opening in the car, and transcribe it to the lexan, and cut out the outer ring. Of course, you could use the black close cell foam that came with those pieces just for that very thing!
------------------ Sometimes the majority only means that all the fools are on the same side.
Use your ears to judge components, NOT your wallet! K.I.S.S.
Printer-friendly view of this topic