posted
I've been looking on here and really I only see box shaped boxes ported...I need to make a wedge shaped cause its in a regcab truck...so can I make a port in a wedge shaped box? and if I can how would I measure it(because the top of the port would be smaller then the bottom of the port outside)?
thanks
Posts: 83 | From: Sacramento, Ca | Registered: Jun 2002
| IP: Logged |
similar to BOX#1 in this link....is that how you would do it? ofcoarse dem. would be different
Posts: 83 | From: Sacramento, Ca | Registered: Jun 2002
| IP: Logged |
posted
Measure top and bottom depth of port, Add together and devide by 2. That should give a pretty good idea of port length..
Could be wrong though.
-------------------- System in my 1997 Opel Corsa Lite Hatch : RFX8340 HU RF Punch 800a4 RF WhiteWolf 1F Cap AudioControl THREE.1 DynAudio 7" Component Set RF Punch HX2 10" http://www.sounddomain.com/id/boomshaka Posts: 726 | From: South Africa | Registered: Apr 2001
| IP: Logged |
1999 Ford Explorer Sport 4X4 -Alpine CDA-9831 -CDT CL-51 two way component's {front} -CDT CL-5X coaxial's {rear} -Cadence A4 -Cadence A7HC -1 DD 9515 in a 5 cub. box tuned to 35 hz with 65.25 sq.inches of vent Posts: 2156 | From: the psychopathic house | Registered: Jan 2002
| IP: Logged |
![[Big Grin]](biggrin.gif)
![[Wink]](wink.gif)
Printer-friendly view of this topic