Author
Topic: Need help with Adire Audio Brahma/ Arc
I have 2 Arc Audio 1500d-r's rated at 1,000 watts at 20hms.
hiphophead
Member
posted 06-07-2002 03:14 PM
I have 2 Arc Audio 1500d-r's rated at 1,000 watts at 20hms.
Posts: 184 | From: Washington | Registered: May 2002
| IP: Logged |
wire them to 1ohm each
khaosman
Member
posted 08-17-2002 01:56 AM
wire them to 1ohm each
Posts: 218 | From: midwest | Registered: Jul 2002
| IP: Logged |
First of All , At one time i was considering the same setup but changed my mind cause brahmas with DVC can only be wired to 1 or 4 ohm of course for one sub and the arc gives 1000 watts at 2 ohms and 900 at 4 ohms so you will get the sensitivity level of 84 cause you can't wire them in parallel unless you want to run the arc at 1 ohm and it isn't suggested that you do so.........
tooshezze
Member
posted 08-25-2002 07:16 PM
First of All , At one time i was considering the same setup but changed my mind cause brahmas with DVC can only be wired to 1 or 4 ohm of course for one sub and the arc gives 1000 watts at 2 ohms and 900 at 4 ohms so you will get the sensitivity level of 84 cause you can't wire them in parallel unless you want to run the arc at 1 ohm and it isn't suggested that you do so.........
Posts: 339 | From: MS | Registered: Sep 2001
| IP: Logged |
(c) 1996-2007 WHE Inc, Carson City Nevada, USA
Infopop Corporation
![[Big Grin]](biggrin.gif)
Printer-friendly view of this topic