posted
Hi, i've got an '83 bronco and i'm gonna be putting a 15" Kicker L7, JBL 1200.1, and JBL 80.4 all in the back. I've got two ideas on what to do... #1) Build the 4.5 cu. ft. 50/50 sq/spl box, turn it on its back, and put a piece of wood at about a 45 degree angle towards the rear and mount the amps to that. This has an advantage because it's easy to build (already planned out) and will look alright with the single 15 facing straight up.
#2) Do someting similar to this While it would take a lot longer, it would be much harder for anyone to get to the amps, and it looks pretty good.
I'm very concerned about theft (as my last system was stolen) so i'll be bolting the box to the body. I also think i'll use some screws with odd shaped heads to screw the sub and amps in. Any advice you can give me is welcome! Thanks!
-------------------- '83 Bronco, 3" body lift, 33x12.5 BF a/t ko's BRAND NEW 302!!! Edelbrock 1405, Edelbrock Intake Manifold Headers, Duals w/ no cats 2 Flowmaster 40 Series JVC SH-99, Kicker 15" L7, Infinity 505cs components, JBL 1200.1, JBL 80.4
posted
Hey I also have a Bronco and will eventually be builting a box for 2 12" for it. Got to make a new center console first. Anyway check out 2 Big Broncos 4x4 Club Southern Chapter They have an Email list you can join. It has been a real big help to me. Plus you will get to know a group of guys and gals that take pride in they trucks and love to go 4 wheeling. Hope you find some ideas.
Talk To Ya Later,
Rob F.
-------------------- "Bronco: Built To Kick Ass."
Posts: 3 | From: Baton Rouge, LA | Registered: Dec 2001
| IP: Logged |
posted
make sure that you bolt it thru with long bolts and hammer them crooked after you have it tight, then it takes a dremmel and cutting wheel to get it out, know many theifs with extension cords and enough balls to plug into your electrical socket? lol
Posts: 8930 | From: over yonder | Registered: May 2001
| IP: Logged |
Printer-friendly view of this topic