posted
Ok first go to your local autoparts store and buy a panel removal tool (lees than $10) then get a phillips screw driver and a small flat blade or a pick of some sort( icepick etc.) you should have some small covers over the screws in the upper corner (closest to car) in the handle and at the opener lever get the covers off and start removing the screws there may be more screws so look before you remove the panel then CAREFULLY get the panel tool under the panel and slowly work from one side to the other prying out the clips (jeeps usally do not take much pressur to remove) once the panel is out remove and atchted wiring and you are done. hope that helped
------------------ Andy Myers Team Under Construction USAC Outlaw spl 251-500 DbDrag Pro 0-5000
Printer-friendly view of this topic