posted
The car will remote start but when you get in and hit the brake it shuts down (RIGHT) but it should stay running after you hit the brake ?
Posts: 2 | From: Lincoln,Ne | Registered: Nov 2009
| IP: Logged |
posted
is the car a push-button start? All the 07 ES350's we have put R/S in have been pushbutton.
A remote start should shut off if the vehicle is not in the ignition-on position.
Posts: 5494 | From: Columbus, OH - formerly FL | Registered: Oct 2003
| IP: Logged |
posted
I installed a remote start on a mits. lancer once. It was supposed to shut off if you hit the brakes. It also shuts off after 15mins of run time.(all with igniton off) But would run if you put key in and turn to the on postion. But that was some time ago.
Posts: 21 | From: prestonsburg,ky | Registered: Sep 2009
| IP: Logged |
unless the ignition is turned to the ON position and THEN brake tapped, the vehicle will shut down when the timer runs out. It will also shut down if the brake is pressed before the ignition is on.
Posts: 5494 | From: Columbus, OH - formerly FL | Registered: Oct 2003
| IP: Logged |
Printer-friendly view of this topic