Author
Topic: Ports
how do you find out how big your port needs to be by the cone area or how ever its done or how many??? can anyone help??
The Cover
New Member
posted 08-25-2009 10:33 AM
how do you find out how big your port needs to be by the cone area or how ever its done or how many??? can anyone help??
Posts: 89 | From: The Swiss City, Indiana | Registered: Oct 2008
| IP: Logged |
I use following
Nemanja
New Member
posted 09-30-2009 06:51 AM
I use following
Posts: 90 | From: Serbia | Registered: Nov 2007
| IP: Logged |
one estimate is at least 16sq.inches per net cubic foot of box volume. for SPL oriented boxes, you can go a bit higher if you have room for the portlength
D-Bass
Senior Member
posted 09-30-2009 09:06 AM
one estimate is at least 16sq.inches per net cubic foot of box volume. for SPL oriented boxes, you can go a bit higher if you have room for the portlength
Posts: 5494 | From: Columbus, OH - formerly FL | Registered: Oct 2003
| IP: Logged |
(c) 1996-2007 WHE Inc, Carson City Nevada, USA
Infopop Corporation
Printer-friendly view of this topic