posted
box was tuned at 40hz but loudest db is @ 52hz 144.9 on tl didnt have time to use my other port board it changes it to 51hz so i hope to see a gain. i have done nothing to box no resin no braces .how much does resin and all thread usually gain ? also need to round my port board . anybody want to share some tips for gaining db in a blazer? im not trying to set a record just want a little louder .2 memphis mojo 12''s 8 cubes 160sq inch port 2-hifonics bxi1610d's set @45 volts each for now.oh @40hz it lost less than a db so sounds good for daily .box is not bolted down either yet will i see a gain? and will maxx-link gain me when installed?
-------------------- now with (TEAM LOW BUDGET)148.1db @43hz and gaining slow lol. street B setup 2000 4 door s-10 blazer 2-mojo 12's powered by 2-bxi1610d's burp box not built yet. add me to myspace if you want atv_man2007 Posts: 78 | From: paintsville ky | Registered: Jul 2008
| IP: Logged |
posted
rounding ur port inside and outside the port should gain, resin should gain, threaded rod or other braceing should gain, double baffles should gain, rounding inside corners might gain, different box position might gain.
Posts: 322 | From: Brantford, Ontario | Registered: Oct 2007
| IP: Logged |
posted
my box is not bolted down yet and on my way home from work box moved a little and im pretty sure it got louder. so i will be moving the box around a bit to see what happens on the meter.
-------------------- now with (TEAM LOW BUDGET)148.1db @43hz and gaining slow lol. street B setup 2000 4 door s-10 blazer 2-mojo 12's powered by 2-bxi1610d's burp box not built yet. add me to myspace if you want atv_man2007 Posts: 78 | From: paintsville ky | Registered: Jul 2008
| IP: Logged |
posted
thanks teamsubgopoof cant wait to put on meter and try out your tips this saturday ill be bracing box with 3/4 all thread and trying some resin. would like to see a nice little gain. and if somehow i can find the time ive got to get fatmat installed .
-------------------- now with (TEAM LOW BUDGET)148.1db @43hz and gaining slow lol. street B setup 2000 4 door s-10 blazer 2-mojo 12's powered by 2-bxi1610d's burp box not built yet. add me to myspace if you want atv_man2007 Posts: 78 | From: paintsville ky | Registered: Jul 2008
| IP: Logged |
posted
now doing a 147.9 @ 44hz on tl still need to do the d pillar vents,fatmat and the big 3.
-------------------- now with (TEAM LOW BUDGET)148.1db @43hz and gaining slow lol. street B setup 2000 4 door s-10 blazer 2-mojo 12's powered by 2-bxi1610d's burp box not built yet. add me to myspace if you want atv_man2007 Posts: 78 | From: paintsville ky | Registered: Jul 2008
| IP: Logged |
posted
oh i forgot all thread and resin gained and lowered the freq from 52hz to 44hz because of my port moving like mad .moving seats and adjusting vents and visors gained .2db holding rear glass in center was a loss and holding outside edges showed no gain .resin and all thread big gain !! oh and a 149.0 drivers side window down lol and a 149.7 in the floor lol.
-------------------- now with (TEAM LOW BUDGET)148.1db @43hz and gaining slow lol. street B setup 2000 4 door s-10 blazer 2-mojo 12's powered by 2-bxi1610d's burp box not built yet. add me to myspace if you want atv_man2007 Posts: 78 | From: paintsville ky | Registered: Jul 2008
| IP: Logged |
-------------------- now with (TEAM LOW BUDGET)148.1db @43hz and gaining slow lol. street B setup 2000 4 door s-10 blazer 2-mojo 12's powered by 2-bxi1610d's burp box not built yet. add me to myspace if you want atv_man2007 Posts: 78 | From: paintsville ky | Registered: Jul 2008
| IP: Logged |
-------------------- now with (TEAM LOW BUDGET)148.1db @43hz and gaining slow lol. street B setup 2000 4 door s-10 blazer 2-mojo 12's powered by 2-bxi1610d's burp box not built yet. add me to myspace if you want atv_man2007 Posts: 78 | From: paintsville ky | Registered: Jul 2008
| IP: Logged |
added a few pics ill try to post the termlab pics later.
-------------------- now with (TEAM LOW BUDGET)148.1db @43hz and gaining slow lol. street B setup 2000 4 door s-10 blazer 2-mojo 12's powered by 2-bxi1610d's burp box not built yet. add me to myspace if you want atv_man2007 Posts: 78 | From: paintsville ky | Registered: Jul 2008
| IP: Logged |
posted
hmm imo box is too big and the freq. is too low...my blazer's freq. is 51hz...im only doing 141.6 for now since thats with the daily setup...1 audiopipe 15", 1 sundown saz1500 @ 2 ohms and a crappy box...im aiming for 149s with the comp setup Posts: 53 | From: San Juan, Puerto Rico | Registered: Nov 2007
| IP: Logged |
posted
ok first off if any of you know the mojo you know it takes a very large box. i know this set up because the box is a team baldman design. the only time i have ever seen a smaller box work with that sub is in a st c crx. this sub works great in a large box if done right. i see this truck doing very well for 2 12s. it just needs some tunning and playing. it is kinda hard to help him 5 hours away. yes the tunning is to low. nothing some tunnig wont take care of. have faith people. ive been around the block a few times.
-------------------- Team Ohio Spl Team Baldman Creations Posts: 1504 | From: sidney oh | Registered: Aug 2001
| IP: Logged |
posted
That 15" mojo I had was in 4cf net, with 65si port, around 10-11" long. peaked at 53
Posts: 5502 | From: Columbus, OH - formerly FL | Registered: Oct 2003
| IP: Logged |
posted
well said john i think this set-up has a little more to offer.
-------------------- now with (TEAM LOW BUDGET)148.1db @43hz and gaining slow lol. street B setup 2000 4 door s-10 blazer 2-mojo 12's powered by 2-bxi1610d's burp box not built yet. add me to myspace if you want atv_man2007 Posts: 78 | From: paintsville ky | Registered: Jul 2008
| IP: Logged |
posted
do you want to fatmat saturday and maybe big 3 chris ?
-------------------- now with (TEAM LOW BUDGET)148.1db @43hz and gaining slow lol. street B setup 2000 4 door s-10 blazer 2-mojo 12's powered by 2-bxi1610d's burp box not built yet. add me to myspace if you want atv_man2007 Posts: 78 | From: paintsville ky | Registered: Jul 2008
| IP: Logged |
posted
added the fat mat baseline was only 147.7 weak batt not charged and after fatmat done a 148.0 went up .3 from base line so should do a little better than a 148.0 now with charged batt freq is now at 43hz still only 45 volt output to each sub and still more to be done!!! next week hope to have burp box done .did not fatmat tailgate on blazer didnt have time to test on meter. got to get big 3 done still!!!
-------------------- now with (TEAM LOW BUDGET)148.1db @43hz and gaining slow lol. street B setup 2000 4 door s-10 blazer 2-mojo 12's powered by 2-bxi1610d's burp box not built yet. add me to myspace if you want atv_man2007 Posts: 78 | From: paintsville ky | Registered: Jul 2008
| IP: Logged |
posted
nice job on the score! when i did the big 3 in my blazer on stock electrical, i jumped .6 dB, maybe you'll have the same luck haha. good job so far!
Posts: 2 | From: Wausau, WI | Registered: Mar 2009
| IP: Logged |
posted
thanks man i think it can get a little louder with the big 3 and charged batt also think the amps can do a little more .i still have not had the time to get it on my buddys o-scope .gotta keep it clean. id love to see a .6 gain!!
-------------------- now with (TEAM LOW BUDGET)148.1db @43hz and gaining slow lol. street B setup 2000 4 door s-10 blazer 2-mojo 12's powered by 2-bxi1610d's burp box not built yet. add me to myspace if you want atv_man2007 Posts: 78 | From: paintsville ky | Registered: Jul 2008
| IP: Logged |
![[Smile]](smile.gif)
Printer-friendly view of this topic