posted
I'm putting to kicker cvr 12" in my 01 explore on a punch 1000.1bd. i was wonder if that is to much for my subs and if that would blow them if turned up to high?????? Also i would was wondering what kind of box yall think i should get??? port or no port???
Posts: 8 | From: Baton rouge | Registered: May 2008
| IP: Logged |
posted
ported of course. Sure, that amp has potential to blow those subs. You could blow those subs on a 400W amp if you were volume and gain crazy. be reasonable with control and you could be just fine.
-------------------- World Record-Loudest SPL in my driveway Team Powermaster/XS-Power Hifonics Amps, Kicker subs-The way it should be Zensky....World Domination at It's Finest www.zensky.com Posts: 3437 | From: Columbus, OH - formerly FL | Registered: Oct 2003
| IP: Logged |
posted
subs up, port back????? how should i wire my subs for best performance??? a diagram would be great...
Posts: 8 | From: Baton rouge | Registered: May 2008
| IP: Logged |
posted
they are DVC 4ohm.......my amp is two chanel but it has mono on it.. dose that mean i use a diagram that says for a mono amp???
Posts: 8 | From: Baton rouge | Registered: May 2008
| IP: Logged |
posted
that amp isn't a 2ch. it's a 1ohm mono amp. It just happens to have two + and two - speaker connections that are internally paralleled. connect the positives on each speaker together, and the negatives together, and run them to + and - on the amp. do the same thing with the other speakers, but run them to the OTHER + and - on the amp
-------------------- World Record-Loudest SPL in my driveway Team Powermaster/XS-Power Hifonics Amps, Kicker subs-The way it should be Zensky....World Domination at It's Finest www.zensky.com Posts: 3437 | From: Columbus, OH - formerly FL | Registered: Oct 2003
| IP: Logged |
posted
okay so let me make sure i got this right.... on one speaker i 2 positives and 2 negatives. i connect the 2 positives and run it to the connector on the box and then connect the two negatives and run them to the connector on the box.... and then do the same on the other speaker... and then just hook up each speaker to each plug on the amp????
posted
just do it this way. on that website, look at the TWO SUBS, 2-ch amp....then (2 DVC 4-ohm sub). wire it just like that. but understand that inside the amp, it's taking both 2ohm loads and paralleling it again internally to a single final 1ohm impedance.
-------------------- World Record-Loudest SPL in my driveway Team Powermaster/XS-Power Hifonics Amps, Kicker subs-The way it should be Zensky....World Domination at It's Finest www.zensky.com Posts: 3437 | From: Columbus, OH - formerly FL | Registered: Oct 2003
| IP: Logged |
posted
okay i know i might sound really lame but what you just said really confused me.... i have them wired up as....http://www.crutchfield.com/learningcenter/car/subwoofers_wiring.html?imageID=2DVC%5F2%2Dohm%5Fmono but on a multi chanal amp....(but it says mono for the spots i have the wores pluged in...) is that wrong????i know how to hook wires and run them but i dont know how to hook up to DVC speaker... i need lames term or some kind of pic....
Posts: 8 | From: Baton rouge | Registered: May 2008
| IP: Logged |
posted
just put ALL of the positives together. put all of the negatives together. use a + and a - on the amp. the end.
-------------------- World Record-Loudest SPL in my driveway Team Powermaster/XS-Power Hifonics Amps, Kicker subs-The way it should be Zensky....World Domination at It's Finest www.zensky.com Posts: 3437 | From: Columbus, OH - formerly FL | Registered: Oct 2003
| IP: Logged |
quote:Originally posted by D-Bass: just put ALL of the positives together. put all of the negatives together. use a + and a - on the amp. the end.
x2.
Or go to a shop and pay few bucks and get them to show you how to wire woofers in series and parallel and explain impedence/resistance or ohms law for you.
-------------------- Posts: 6554 | From: Russellville AL | Registered: Nov 2002
| IP: Logged |
posted
so u have the sub facing the front of your car and the port going to the back??????how about subs up and the ports to the back??
Posts: 8 | From: Baton rouge | Registered: May 2008
| IP: Logged |
quote:Originally posted by CrAzZy: so u have the sub facing the front of your car and the port going to the back??????how about subs up and the ports to the back??
do some testing in the suv, I've seen some sub foward port back setups that were pretty loud
-------------------- Posts: 6554 | From: Russellville AL | Registered: Nov 2002
| IP: Logged |
posted
try 2cf with a single 6" aeroport at full length, or maybe three 4" at full length.
-------------------- World Record-Loudest SPL in my driveway Team Powermaster/XS-Power Hifonics Amps, Kicker subs-The way it should be Zensky....World Domination at It's Finest www.zensky.com Posts: 3437 | From: Columbus, OH - formerly FL | Registered: Oct 2003
| IP: Logged |
Printer-friendly view of this topic