posted
Will be installing system in my son's g35. AS of now setup is as follows. W205 with 701 processor, Front Dynaudio 242, rear Cadence clvs693 (I know really don't need them but he wants them), Sub will be Fi Q 12 sealed. As of no the sub amp is PDX 1000.1. Thinking PDX 100.4 front and PDX 150.2 rear. and about 100sq/ft deaden probably RAAMAT. Any suggestions, or opinions. Now for the question is the
Posts: 10 | From: Florida | Registered: Nov 2005
| IP: Logged |
posted
My question was about setting up the 701, will be biamping the front components. The 701 has four outs to the front can time correction and crossover be set for each of the four channels. And the follow up question anybody in Fl, shop or individual that is available for help setting SQ system can handle the install need help tuning system. Thanks for any input
Posts: 10 | From: Florida | Registered: Nov 2005
| IP: Logged |
posted
You can use time alignment on all 4 of the front output channels.
Front 1 will be your tweeters.
I would put the rear 6x9's on the Front output.
Rear put your front midbass drivers.
I would do the above because of the equalizer in the 701. The equalizer is for the front, rear and subwoofer. You don't really care that much about the rear fill. For 99% of your SQ listening I'd bet you turn it off anyway. So doing the above allows you to tune the tweeters---even below the crossover point, without effecting the front midbass. You put the front midbass on the rear so that you can tune the rear equalizer without effecting the tweeters. Doing that gives you greater flexibility.
the only negative to doing that is it ruins 5.1 (which you are not doing without a center channel) and when you watch movies you are going to have to change some crossover points and other settings to be able to hear the dialogue.
Tuning wise for SQ though--that set up works better.
Don't forget to turn off the MX feature and other "self tuning" crap the 701 has by default turned on. Due that before you do anything else.
posted
Lakeland that between Orlando and Tampa. Willing to drive for good help. Thanks for the great input makes sense. It great to find someone who knows what they are talking about. There are so many people with advise on the internet to find someone with good advise is great. Thanks again
Posts: 10 | From: Florida | Registered: Nov 2005
| IP: Logged |
posted
I would ask Steve Head (he goes by Audionutz on the forums). He is in Ocala. Look at http://www.dynamicautoacoustics.com on the forums. He is there.
posted
Thanks for the reply will be installing starting this weekend once I get it done ill give Steve a call Again Thanks
Posts: 10 | From: Florida | Registered: Nov 2005
| IP: Logged |
posted
I've noticed that when I play a DVD my volume seems way too low - is this related to my 701? I've got the MX turned off. It hasn't been a big deal to me because I RARELY play a DVD but............ Martin
-------------------- Too much of everything is just enough. Posts: 391 | From: Boston | Registered: Oct 2005
| IP: Logged |
posted
Got everything installed except the tweeters wanted to try different mounting positions velcro and extra wire for now. The Dynaudio tweeters are pretty big. Probably the A pillar but that is going to take some work to install them there. Now ill be a matter of tuning.
Posts: 10 | From: Florida | Registered: Nov 2005
| IP: Logged |
Printer-friendly view of this topic