posted
I have a Smart car doing a very nice component installation on the dash, custom fiberglass, with the dbdrive Euphoria 5.25 set. I'm looking for input on how to do the lay-out of the speakers for best sound quality? I was going to aim the midbass drivers straight ahead on an angle upward toward the windshield, and the tweeters would be mounted on the A-pillars firing across the car.
thanks.
--------------------
Team Perfect Tones Team Visonik Loudest SS 1-2 in Canada www.perfect-tones.com Posts: 439 | From: Acton, Ontario, Canada | Registered: Aug 2001
| IP: Logged |
posted
it's canadian, european. i don't know if it just doesn't meet crash test stanterds or its being strong armed by the big 3, or whatever but they're tiny cars that are not sold in america
-------------------- two 15" l7s us amps 2000 Posts: 323 | From: detroit | Registered: Sep 2006
| IP: Logged |
posted
Im also going to be doing this soon (i already have a pair on the pillars in fiberglass enclosures molded around each pillar...only theyre coaxials but still sound pretty darn good) but im most likely going to have 2-3 pairs of 6.5" (probly only going to use 1 pairs tweeters...maybe two tho)....does nay one here know of a site where there are alot of these types of installs (alot of dash mounted speakers and fiberglassing the front-stage...dash, doors, etc.) thanks. and good luck
-------------------- Creator-Ohio Bass Society
First and only dual-alternator 'real' Saturn (pre 2002) on the planet (2) 18" Omegas fed by a SoundStream XXX10000 12.75 cubes net @ 30.5Hz, 200 sq inches of port Replaced AC with 250 amp alt 225 amp alternator in stock location (custom bracket) (2) XS Power D3100's 4 power+4 ground 1/0-gauge runs Posts: 1281 | From: OH | Registered: Apr 2007
| IP: Logged |