posted
hi wayne, it's bryan b. after down loading all the software we did the other day, now my meter reads 1.1 db's down from what it did before ???
before the down load i was doing 151.8 easy , all the time(outlaw ).
now only thing different is we (you and i ) added all the new down loads / up grades.
but before we did that my meter was .8 to .9 higher than all the meters at every show.
just wondering what might be going on ? thx bryan battles
-------------------- bryan b. Team DB Driven Team Gates Bryan@SickAudio DD's are fun... Posts: 506 | From: PRYOR,OK. | Registered: Sep 2003
| IP: Logged |
In situations such as this (where you seem to be getting variations in your readings), there are several factors which could be causing the problem.
I will list them in the order that you should check.
First, try to find another Term-LAB system (at a show, for example) and put both systems in the vehicle at the same time. We need to establish definatively that there is a problem. (Many times, changes in readings are the result of changes to the sound system.) You might also just try another user's sensor.
Verify that the K-Factors are set properly. See your owner's manual for the correct K-Factor settings for your sensor.
Try replacing the sensor cable. This is by FAR the greatest hardware failure that we have seen.
The sensor may be bad. This is pretty unlikely as I think we have only had like 2 bad sensors and one of those was user abuse.
Hope this helps! Good luck this weekend.
-------------------- "Keep it Loud and Make me Proud!"
posted
thank you wayne, i'll try it at a show today.. bryan b.
-------------------- bryan b. Team DB Driven Team Gates Bryan@SickAudio DD's are fun... Posts: 506 | From: PRYOR,OK. | Registered: Sep 2003
| IP: Logged |
![[Big Grin]](biggrin.gif)
Printer-friendly view of this topic