posted
Hey guys, im using an older termlab setup, i'm installing it, the USB dongle works, termlab itself will open, and the other program will see the pcimia card, but i have a question, where is the driver found for windows, or is it required. As of right now, everything runs fine, the only driver I can't seem to find is for the card... and this is a Win98 setup, the machine is capable of my 2000 pro, but rather not upgrade if we dont have too, termlab version 3.8.1, thankyou
-------------------- ::: TFE :::, Team Fatal Excursion New Project... '88 Nissan 200SX Isn't Loud Enough...
posted
Bump... wayne and everyone else, the computers been updated, the key works, i still can't get any readings in the program, i checked the computerboards, inc website, and checked how these pcmcia cards work, and it bypasses windows driver setup by using a utility? the instacal program see's the card, a little help please... thank you.
-------------------- ::: TFE :::, Team Fatal Excursion New Project... '88 Nissan 200SX Isn't Loud Enough...
posted
Are you using a .NET system, or a USB system? In other words, does your Termlab box connect to the PC with a USB cable, or does it connect to the PCMCIA card?
posted
In the device manager, how does the pcmcia card read? program starts fine, just doesn't meter, and won't count down... this is the older 3.8.1 setup, I havent updated, dont know it .net is still supported
-------------------- ::: TFE :::, Team Fatal Excursion New Project... '88 Nissan 200SX Isn't Loud Enough...
posted
alright, So, I installed 2000 pro, got the USB drivers up, instacal, new version of termlab, usb key works fine, but now instacal can't fine the pcmcia card at all, in the windows 98 setup it could see the card and just not run termlab properly, again, my OS sees the card and registers it as unknown device, but instacal can't see the device to set it up, a little help please...
-------------------- ::: TFE :::, Team Fatal Excursion New Project... '88 Nissan 200SX Isn't Loud Enough...
posted
alright, i checked the stats on the laptop, it supposedly has 450mhz celeron, and that 64 megs of ram, and a 6 gig drive, so, this is the 2nd OS upgrade to this machine in two days, will report if XP will run it or not...
-------------------- ::: TFE :::, Team Fatal Excursion New Project... '88 Nissan 200SX Isn't Loud Enough...
posted
Alright, I've upgraded to Windows XP home, now TermLab 3.8.1 starts, but Instacal can still not find the PCMCIA card, it only uses the DEMO on the ISA board. when installing newer Term-Lab software, it tells me that there is missing hardware, which leads me to beleive that instalcal def. isn't able to find the card. any work arounds for this guys?
-------------------- ::: TFE :::, Team Fatal Excursion New Project... '88 Nissan 200SX Isn't Loud Enough...
Printer-friendly view of this topic