TL Net 5.5.31 RTA Problem

my profile | directory login | register | faq | forum home

»	Termpro Audio Forum » General Interest » Term-LAB » TL Net 5.5.31 RTA Problem – Help Needed

UBBFriend: Email this page to someone!

Author

Topic: TL Net 5.5.31 RTA Problem – Help Needed

danilo
New Member
Member # 15378

posted

I really need help from someone!!! Please….

I Downloaded Term-Lab NET 5.5.31 upgrade
My problem is that now I am not Able to use the RTA Behringer ECM-8000 mic that I bought with my kit from Wayne, last year.
( While the SPL is all OK )

in RTA func. It seems to be supported only the SoundBlaster Mic in, but It seems to be no more supported the Behringer …Possible?

There Is no way to use it that mic with the upgrade ? Or It’s me?

Please, help me !!!

Danilo baglione

Posts: 7 | From: Italy | Registered: Jun 2004 | IP: Logged |

Connect the "Line Out" RCA jacks on the back of the Term-LAB.NET interface box to the "Line-In" jack on your soundcard. (Normally blue). You will need a cable with 2 RCA plugs on one end and a 3.5mm mini-plug on the other.

Select Line-In as the input source in the Windows Sound Control Panel (Recording Controls) as outlined in the Broadband RTA Upgrade instructions.

Please refer to the following article for instructions on using the upgrade...

http://www.termpro.com/term-lab/articles/broadband.htm

--------------------
"Keep it Loud and Make me Proud!"

Wayne Harris

Wayne Harris
Administrator
Member # 2

posted

Danilo,

Here is how to use the Behringer mic with the new version of Term-LAB.

Connect the "Line Out" RCA jacks on the back of the Term-LAB.NET interface box to the "Line-In" jack on your soundcard. (Normally blue). You will need a cable with 2 RCA plugs on one end and a 3.5mm mini-plug on the other.
Select Line-In as the input source in the Windows Sound Control Panel (Recording Controls) as outlined in the Broadband RTA Upgrade instructions.

Posts: 4978 | From: Austin, TX | Registered: May 1999 | IP: Logged |

Printer-friendly view of this topic

Hop To: