posted
every time i turn up my sound system the epx cuts out, not a voltage problem have check it high sound levels 12.45 volt, only cut out one side of the stero right side change rca cable and still same problem unhook the epx outof the system and no problems, something loose in the epx ? because if i mess around with rca cable ends at the epx i will work for a little while any help woud be great and dose any have the dsp card in there epx i also have the 28 band eq in the epx
posted
duke if the joint on the rca is cracked would it effect both sides of the input on the epx? because i have try both or is it on the output side ?it seem to only effect the hp and ap amps not the low output. thanks for any input
posted
dukk if the joint on the rca is cracked would it effect both sides of the input on the epx? because i have try both or is it on the output side ?it seem to only effect the hp and ap amps not the low output. thanks for any input
posted
dukk any toughts on what could be wrong with my epx and has anyone used the dsp card with their epx? any input would be great thanks xc660 or should i send it rf to be test and fix from the people who made it or send it to wayne the really god of the epx
Printer-friendly view of this topic