2005 SLAP FINALS 3rd place SS2 2005 IASCA FINALS 1st place adv. 2 2005 MECA FINALS 2nd place M-7 2006 received an A$$ kicking 2007 4th(at indy) Street B 2008 taking a vacation 2009 still on vacation Posts: 509 | From: canton il usa | Registered: Jun 2001
| IP: Logged |
-------------------- Travis Atherton Team Big Guys! 2005 World Finals – Street C 2005 CHEVY SILVERADO 3500 CC/LB/6" lift 4 MEMPHIS MOJO 15's RECONED WITH FI PARTS 1 HIFONICS GOLIATH Posts: 4275 | From: Hudson, MI | Registered: Jul 2007
| IP: Logged |
-------------------- Team Notoriously Loud Mafia I will drop to my knees and straight up junk punch you Posts: 2509 | From: philcampbell, al | Registered: Aug 2006
| IP: Logged |
custom cooling in the motor. looks very similar to a 4hp with a few revisions. audiopulse is a 4hp.. IIRC quite a few of the subs mentioned here. TRF,Cactus,Soundstream XXX.... from what I recall even the original TSNS tho some people may say otherwise lol.
I've been looking into them. but at the current top of my list would be Atomic ApXX or XXX which I heard was in the worx a while back. only because they're WELL proven to handle abuse . but from what I've heard about the Atomics they will absorb whatever you want to throw at them... I think the Moab and ApXX use 9" spiders tho as they're typical 6 spoke 18" venezuela baskets... here's a link to the moab
cooling in the pole piece, cooling in the back plate. custom vents cut into the basket
the 15" version they use a venezuela basket with a 10" basket outter frame as a spider landing to accomadate 10" spiders. back on page 1 I believe. but I like the cooling part the most. not as elaborate as DD or even the soloX nor is the former vented like the Orion HCCA but the motor is nice and overall I like the parts they have available to use... going to order a few parts from them to build a top for my 4hp and see what I can do with it...
-------------------- Posts: 2074 | From: Kailua-Kona, Hi | Registered: Dec 2001
| IP: Logged |
posted
^ bad aurse looking subs and unlike most manufactures showed the entire build and pic. that was really nice to see. looks like a tough sub!
Posts: 6725 | From: north rose,ny | Registered: Aug 2002
| IP: Logged |
posted
J.Demuth. are there any pics of this woofer?? I would be first in line but for over 6mo all I have seen are empty promises of an uber woofer.
If they become available and I can actually purchase some I will completely apologize but if not I honestly feel you owe your customers and the community as a whole an apology. A delay is understandable but for a short time this is a cop out. And even here you don't give any sort of a concrete date. There is a guy on another forum who has built a box and an entire system around this mystery driver PLEASE don't let him down. I would love to be a fan, I have spoken to you several times on the phone and you really do seem like a personable man. But in order to save integrity you really need to produce this driver very soon and in a large enough number to meet the demand that a great woofer would create in a market literally crying out for it. As of this moment I'm calling B.S. on the 08 T.S.N.S. and Boogie monster hell it's november already. PLEASE prove me wrong.
posted
Well its one thing to make a subwoofer loud with a burp at higher than normal frequencies its a whole other subwoofer if it can do those same numbers at or below 40 hz. I don't think what I am looking for is made right now by any company. If you think there is one post a link to pictures/specs.
The Cactus,Soundstreamxxx,GZ and others with the 5200/4hp type of motor are on the right track, I just don't think they are there yet with a 4" coil design.
-------------------- -Donald Hebig -All Out S.P.L. Saskatchewan's dB Drag event promoter -Check the Termpro homepage partners for the companies I support. Posts: 2622 | From: Borden, Saskatchewan. Canada | Registered: Feb 2000
| IP: Logged |
posted
Don have you looked at acoupower? they have a 6" coil and are designed for extended high power. they have been tested to be in line with the LMS Ultras and RE XXX in terms of SQ and excusion. the big drawback is that they are svc 8hom which leaves me out or I would already be running them.
Don PLEASE make these wooffers yourself and make them available to the rest of us I miss the good ol' days when you were making drivers as good as or better than the rest for a good price I LOVED my 15" INHUMAN p.s. youdaman!
posted
Don you cant go wrong with atomics 4" coils. my apxx 15's with 3" coils have taken more abuse then any other sub i've owned. and im talking daily abuse at very low frequencies. way more durable then my fi btls i have. My system is daily oriented in my sig and my apxx's never break a sweat. I would def consider atomic as ur top choice def for the price. im sure T3's are amazing subs but i cant afford those.
posted
looks nice steve and no ca com here i see all the love they have there
-------------------- TEAM420 TEAM KINETIK TEAM MAXXSONICS T3AUDIO TEAM DCAUDIO SS 1-2 3rd PLACE 2007 INDY "REGIONALS" SS 1-2 1ST PLACE INDY AND 2008 NATIONAL CHAMPION.
posted
OK we found another one that actually may fit the description. That coil is either sitting high off center or it is one BIG(tall) coil. It appears to be designed for straight up excursion,heat and lows. Does it have a pole vent? Also I like those baskets because it allows me to use my IR/Lazer temp sensor on the coils so I can monitor the coil temp from the dash.
Steve do you know the coil specs, gap height and some T/S numbers just to get an idea of the sub. So far this seems the closest to what I meant in my original post. And from whats visible it has a nice glue job also you don't see that much these days.
-------------------- -Donald Hebig -All Out S.P.L. Saskatchewan's dB Drag event promoter -Check the Termpro homepage partners for the companies I support. Posts: 2622 | From: Borden, Saskatchewan. Canada | Registered: Feb 2000
| IP: Logged |
posted
It looks like a Fi/Ascendent Audio/TC Sounds frankenstein woofer. I'm sure that will be a pretty bad ass sub when put to the test.
-------------------- TEAM SUNDOWN AUDIO 2009 NSPL Car 1801-3600 Watt Record Holder: 151.2db 2009 NSPL Car 3601-Up Watt Record Holder: 152.6db 2009 NSPL Car Hardcore Record Holder: 155.2db 2009 NSPL Car 3601-UP, Car Hardcore, and Car Points World Champion Posts: 1854 | From: The Triad | Registered: Jan 2008
| IP: Logged |
quote:Originally posted by AllNightLong: It looks like a Fi/Ascendent Audio/TC Sounds frankenstein woofer. I'm sure that will be a pretty bad ass sub when put to the test.
sexy ass subs none the less, Id throw my dd 9518s in the trash for these.
quote:Originally posted by T3audios160s db jeep: looks nice steve and no ca com here i see all the love they have there
thanks
i dont know what the problem is at CA - those guys are a complete joke over there.
quote:Originally posted by dB Don: OK we found another one that actually may fit the description. That coil is either sitting high off center or it is one BIG(tall) coil. It appears to be designed for straight up excursion,heat and lows. Does it have a pole vent? Also I like those baskets because it allows me to use my IR/Lazer temp sensor on the coils so I can monitor the coil temp from the dash.
Steve do you know the coil specs, gap height and some T/S numbers just to get an idea of the sub. So far this seems the closest to what I meant in my original post. And from whats visible it has a nice glue job also you don't see that much these days.
sorry Don, i dont have many specs YET. This is only the second day ive been able to discuss it on the net. They will be ready mid/end of january and im sure by then ill have whatever specs you need. Here is some generic info about it.
quote:Originally posted by dB Don: That coil is either sitting high off center or it is one BIG(tall) coil.
Don , to what i see the topplate just go's on inside the basket . ( some TC style subs got this also , just dont remember the type ) So perfect centered and normal style coil
posted
Well Steve if you think these can take 5kwrms daily and want me to test four 15" dual 1 ohm subs let me know. If these subs will hold and do 157-160@30hz without busting You will definitely sell a lot of them starting with mine. You can check out the build on my facebook page.
-------------------- -Donald Hebig -All Out S.P.L. Saskatchewan's dB Drag event promoter -Check the Termpro homepage partners for the companies I support. Posts: 2622 | From: Borden, Saskatchewan. Canada | Registered: Feb 2000
| IP: Logged |
![[Smile]](smile.gif)
![[Big Grin]](biggrin.gif)
Printer-friendly view of this topic