posted
i have 3 marine dual purpose batteries 850mca,180reserve minutes, and a 150amp alternator(hooked to batteries and 2 mmats d300hc only) Would 2 batteries be enough or should i use all 3? i am using 1/0ga. wire from alt. to batteries,4 ga. batteries to amp, amps are wired into 1.25 ohm load!!!! If Tiny can i can!!!(amps lower than 2ohms)
The alternator 150 amp (chrysler)all i know is the alternator was made in 1997,needs an external regulator, Where do i get an adjustable regulator that will work?
[This message has been edited by JONS415 (edited 11-14-99).]
posted
Since you already have all three batteries, why not use them all? However, this could increase the load on the alternator, so perhaps you want to use one battery per amp :-) Let's wait for more comments on this one .
ShadowStar
------------------ Computers are a lot like air conditioners.. Open Windows and they become useless..
The day Microsoft makes something that doesn't suck is the day they make vacuums.
Posts: 2579 | From: Somewhere In the Northeast | Registered: May 1999
| IP: Logged |
Printer-friendly view of this topic