posted
**can anyone send me a astro-flex diagram for my car before i start tommrow so i know right where to go***
As off Nov 16 8:00am i will be doing my 2 combo alarm.Im just so nerves that i will run out of time are pop one off those 40 amp fuses from under the hood.
I was told by Murph that its a 5-10 to do
the vehical is 01 cavalier
Alarm Autopage RS855LCD
Things i have to figure out
1,what kind of door locks
2,should i are not disconnect neg batt terminal so i don't look up factory radio are take a chance and just solder the wires.
3,Door pin type
4,Pri ign-wire colour
If anyone can lead some tips are tell where a good place for the siren is on the 2.4 is that would be great.
that is all,just thought i would share i know this is one big job but i just keep thinking of the features it will have in the end
Posts: 449 | From: Port Hope | Registered: Feb 2004
| IP: Logged |
posted
here ya go man.... just replace the DTI color with the color on the alarm system ur using.
just be sure to have a factory bypass, the passlock bypass. hardest part is finding that alarm disarm wire and tach if you need to. but i always set the starter systems to voltage sense.
just mount the siren where it cannt easily be reached from under the vehicle but still preaty open so the sound can get out and be loud enough to do some good!
Posts: 4858 | From: indiana | Registered: Apr 2003
| IP: Logged |
Printer-friendly view of this topic